(unknown)

[Dan Morphis]

Thank you Dave. We ended up using IP and option 43. Works better then I
expected honestly :)

On Thu, Apr 9, 2015 at 6:07 AM, Dave <patronoflies at gmail.com> wrote:

> Dan Morphis <dan <at> milkcarton.com> writes:
>
> >
> > I have a few questions about how other people are doing their CPE ACS
> > implementation.
> > Are you using a single VCI/VPI and doing the management
> > over the public internet? Or do you have a separate VCI/VPI specifically
> >  for management? Do you have bridged mode modems connected to your ACS?If
> you are doing management over a separate interface, for the management url,
> are you using DNS or hard-coded IP? Are you doing split DNS?
> >
> >
> > How are you assigning the ACS url to the CPE? Factory config, or DHCP
> option 60?
> > Thank you for your help!
> >
> >
> > -dan
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users <at> lists.genieacs.com
> > http://lists.genieacs.com/mailman/listinfo/users
> >
>
> Hey Dan,
>
> Personally, I use DHCP option 43 to send the ACS URL to the CPEs. I am
> using
> diffrent kinds of CPEs and this seems to be the standard. I also use the IP
> address. As said earlier this takes away one point of failure.
>
> Hope this helps,
>
> Dave
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20150409/96d992ce/attachment.html>