Parameters doesn't show up

[Sergio Fernández]

Today I tried reinstalling the GenieACS server in an Ubuntu 15.10 Server 
and it went perfectly well... All problems disappeared

El 30/09/15 a las 11:02, Sergio Fernández escribió:
> Today I tried sending commands to the CPE. The CPE answered me with a 
> 401 Unauthorized. I deactivated the login to the CPE and now I can 
> commit tasks like rebooting it. But the problem still persists, I 
> can't make all the parameters to appear. When I send a 
> getParameterValues on the InternetGatewayDevice option, it shows me 
> that it has invalid arguments. This doesn't happen, for example, if I 
> do it for 
> InternetGatewayDevice.DeviceSummaryInternetGatewayDevice:1.1[](Baseline:1, 
> EthernetLAN:1, USBLAN:1, WiFiLAN:1, ADSLWAN:1, Time:1, IPPing:1, 
> ATMLoopback:1, DSLDiagnostics:1, DeviceAssociation:1).
> There are parameters that fault, others that doesn't...
>
> Thank you for your help and dedication.
>
> El 29/09/15 a las 13:02, Sergio Fernández escribió:
>> Now after doing this, I can see that the CPE still makes an inform 
>> every 5 seconds. The CPE wasn't doing this before! but the list of 
>> available parameters is still so short.
>>
>> El 29/09/15 a las 12:59, Sergio Fernández escribió:
>>> I've tried again with another user/pass and the problem still 
>>> persists, and I've tried deleting the cpe and rebooting the server 
>>> also, refreshing InternetGatewayDevice tells me "Invalid arguments" 
>>> under the "Fault" column.
>>>
>>> Thank you.
>>>
>>> El 29/09/15 a las 10:20, Dariusz Szymański escribió:
>>>> You are sure that your connection request username/password match to
>>>> auth.js?
>>>> If yes then have yyou tried to refresh on the InternetGatewayDevice
>>>> paramerer, or try to remove the device?
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Users [mailto:users-bounces at lists.genieacs.com] On Behalf Of 
>>>> Sergio
>>>> Fernández
>>>> Sent: Tuesday, September 29, 2015 10:16 AM
>>>> To: Community support for GenieACS users <users at lists.genieacs.com>
>>>> Subject: Re: Parameters doesn't show up
>>>>
>>>> Thank you for answering me.
>>>>
>>>> I've changed the parameter options, cleared them... To see if it 
>>>> helps but
>>>> nothing. You can see the parameters of the CPE in the image attached.
>>>>
>>>> I've also put an user/pass in auth.js and the same in the CPE but 
>>>> it's still
>>>> the same.
>>>>
>>>> The thing that makes me wonder why is not working is because the 
>>>> CPE sends
>>>> all his parameters in the pcap file I sent in the email before, but 
>>>> GenieACS
>>>> seems like not picking it up correctly and making the CPE to 
>>>> disconnect.
>>>>
>>>> Thank you a lot, guys!
>>>>
>>>> El 29/09/15 a las 09:30, Dariusz Szymański escribió:
>>>>> Hi,
>>>>>
>>>>> I had the same issue, the problem was that there ware some custom
>>>>> connection request username and password on the cpe so acs could't
>>>>> connect to it and get the parameters.
>>>>>
>>>>> Darek Sz.
>>>>>
>>>>> -----Original Message-----
>>>>> From: Users [mailto:users-bounces at lists.genieacs.com] On Behalf Of
>>>>> Sergio Fernández
>>>>> Sent: Monday, September 28, 2015 12:32 PM
>>>>> To: Community support for GenieACS users <users at lists.genieacs.com>
>>>>> Subject: Re: Parameters doesn't show up
>>>>>
>>>>> Thank you, Zaid
>>>>>
>>>>> I've mounted again GenieACS and found that I always suffer this 
>>>>> error.
>>>>> Adding the option "COOKIES_PATH" : "/" to config.json didn't help
>>>>>
>>>>> I also have noticed that when the CPE first contacts with the ACS it
>>>>> sends the whole XML file (with all the parameters) but maybe the
>>>>> GenieACS doesn't know how to get them. Then, as you can see on the
>>>>> pcap file, there's no more connections from the CPE. (In the CPE I
>>>>> have set to inform every 30 seconds, this worked a month ago, so it
>>>>> may be not a problem of the CPE, but no clue of what's happening)
>>>>>
>>>>> Thank you!
>>>>>
>>>>> Sergio Fernández
>>>>>
>>>>> El 04/09/15 a las 01:45, Zaid Abdulla escribió:
>>>>>> On Tue, Sep 1, 2015, at 01:46 PM, Sergio Fernández wrote:
>>>>>>> Hello!
>>>>>>>
>>>>>>> I've mounted a second server for testing inside a VMware.
>>>>>>>
>>>>>>> I connected a Tenda W300D and some parameters appear but I can't
>>>>>>> make the rest of the parameters to be shown.
>>>>>>> Here I send you the .dump attached. What I can see is that the
>>>>>>> parameters I can see are in this dump but I can't see the other.
>>>>>>>
>>>>>>> In the first machine I installed GenieACS in, I didn't have these
>>>>>>> problems with these types of router. I don't know what is 
>>>>>>> happening.
>>>>>> Looks like the common cookies issue. Try adding the following option
>>>>>> to
>>>>>> config.json:
>>>>>>
>>>>>>        "COOKIES_PATH" : "/"
>>>>>>
>>>>>> If this doesn't help, try to capture the communication using tcpdump
>>>>>> or Wireshark and look for the cookie headers of the CPE request that
>>>>>> comes immediately after the very last ACS request you see in the 
>>>>>> dump
>>>>>> file you attached.
>>>>>>
>>>>>> Zaid
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at lists.genieacs.com
>>>>>> http://lists.genieacs.com/mailman/listinfo/users
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.genieacs.com
>>>>> http://lists.genieacs.com/mailman/listinfo/users
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.genieacs.com
>>>> http://lists.genieacs.com/mailman/listinfo/users
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.genieacs.com
>>> http://lists.genieacs.com/mailman/listinfo/users
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.genieacs.com
>> http://lists.genieacs.com/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20151202/0b13348b/attachment-0001.html>