Best way to autoconfigure routers and resist reset to factory defaults

Dan Morphis dan at milkcarton.com
Wed Dec 16 13:55:04 EST 2015


The event is in the payload. I do different things based on the event as well. 

-dan

> On Dec 16, 2015, at 9:28 AM, Don Johnson <don.johnson at uniserveteam.com> wrote:
> 
> Dan
>  
> Actually I modified it so that both the deviceId and the requestEvent would be passed to my api.  I added a second variable to the NOTIFICATION_URL so my code could take different actions for a PERIODIC inform or VALUE CHANGE inform that I may not want to do, on a BOOT.  In the end it just gives me more flexibility, as opposed to doing the same actions for all the requestEvents that are included in the NOTIFICATION_TYPES.
>  
>  
> Don Johnson
> Internal Developer / DBA
> Uniserve Communications
> Suite 330 - 333 Terminal Avenue, Vancouver, BC V6A 4C1
> Phone: 604-996-8213
> Email: don.johnson at uniserveteam.com
> www.uniserve.com
>  
> <image001.png>
>  
> This e-mail, and any attachments thereto, is intended for use by the addressee(s) named herein, and may contain legally privileged and/or confidential information.  If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution, or copying of this e-mail, and any attachments thereto, is strictly prohibited.  If you have received this e-mail in error, please notify me by e-mail (by replying to this message), or by telephone (noted above), and permanently delete the original.  Thank you.
>  
> From: Users [mailto:users-bounces at lists.genieacs.com] On Behalf Of Dan Morphis
> Sent: December 4, 2015 11:54 AM
> To: Community support for GenieACS users <users at lists.genieacs.com>
> Subject: Re: Best way to autoconfigure routers and resist reset to factory defaults
>  
> Not sure why you had to modify the fork. I bet you forgot the %s in NOTIFICATION_URL. %s is replaced with the device ID.
> 
> Example: "http://my-site/Api/ACS/Event/%s"
> Would get turned into:
> http://my-site/Api/ACS/Event/00236a-96318REF-SR360NA025%2D0005755
>  
> As to your issue with the CPE not finding the ACS, try using DHCP.
>  
> In your dhcpd.conf file put this:
>  
> # always send option 43 (0x2b) even if the client was too lame to ask for it
> option dhcp-parameter-request-list = concat(option dhcp-parameter-request-list,2b);
>  
> # define the TR-069 server in the vendor-options
> option space tr069;
> option tr069.acs-server-url code 1 = text;
> vendor-option-space tr069;
> option tr069.acs-server-url "https://YOUR-ACS-URL:7548/";
>  
>  
>  
> On Fri, Dec 4, 2015 at 8:14 AM, Don Johnson <don.johnson at uniserveteam.com> wrote:
> I’m using Dan’s fork as well. I had to modify the message the GenieACS sends to include the event as well as the device_id as I wanted to do some different things for different events, and not need to set the login for all events.  The GenieACS sends the message to our own API, and from there I can find the device in my inventory database, match it up with the service details in the services database, and then create a couple setPrameterValues Tasks for that device, with a connection request, that will update the login on the device. 
>  
> This is working well in my test environment so far, but I’m having problems with firmware not finding my ACS out of the box even with the ACS url built into the firmware.  Not an issue with the ACS, or dan’s fork, just a headache with the modem.
>  
> Don Johnson
> Internal Developer / DBA
> Uniserve Communications
> Suite 330 - 333 Terminal Avenue, Vancouver, BC V6A 4C1
> Phone: 604-996-8213
> Email: don.johnson at uniserveteam.com
> www.uniserve.com
>  
> <image001.png>
>  
> This e-mail, and any attachments thereto, is intended for use by the addressee(s) named herein, and may contain legally privileged and/or confidential information.  If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution, or copying of this e-mail, and any attachments thereto, is strictly prohibited.  If you have received this e-mail in error, please notify me by e-mail (by replying to this message), or by telephone (noted above), and permanently delete the original.  Thank you.
>  
> From: Users [mailto:users-bounces at lists.genieacs.com] On Behalf Of Dan Morphis
> Sent: December 4, 2015 8:06 AM
> To: sergio.fernandez at electronicamartinez.com; Community support for GenieACS users <users at lists.genieacs.com>
> Subject: Re: Best way to autoconfigure routers and resist reset to factory defaults
>  
> I use my notification patch for genie. That sends events like BOOT and BOOTSTRAP (first boot from factory reset) to my server. There I figure out what needs to be done to the cpe. My fork is at github/akcoder/genieacs 
> 
> -dan
> 
> On Dec 4, 2015, at 2:30 AM, Sergio Fernández <sergio.fernandez at electronicamartinez.com> wrote:
> 
> Good Morning!
> 
> I've been told that configuring presets in order to autoconfigure routers and resist a client's factory default action it's bad for GenieACS. So I want to change the way I'm doing it.
> 
> So my question is: What is the best way so all the routers of my company accomplish these 2 things:
>     1) That when you connect the router to the ADSL or the WAN port it autoconfigures by itself
>     2) When the client performs a factory default, it autoconfigures by itself with its own PPPoE login
> 
> I thank you in advance for all the advice given
> 
> -- 
> Nombre: Sergio Fernández Rubio
> Cargo: Ingeniero de Software y de Redes
> Departamento: TIC
> mail: sergio.fernandez at electronicamartinez.com
> ficina: 968 165 000
> Página web: www.electronicamartinez.com
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
> 
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
> 
>  
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20151216/abdf485d/attachment.html>


More information about the Users mailing list