grabbing a live list of params

[Dan Morphis]

I've updated the documentation
<https://github.com/zaidka/genieacs/wiki/API-Reference#getparametervalues>
to show how you would do this.

On Fri, Jan 9, 2015 at 11:34 AM, Christopher Chance <cchance at newtechgrp.com>
wrote:

> :S so how would I then pull those values to complete it since it’s a 2
> step processs (refresh then grab values)
>
>
>
> *From:* Users [mailto:users-bounces at lists.genieacs.com] *On Behalf Of *Dan
> Morphis
> *Sent:* Friday, January 9, 2015 4:33 PM
>
> *To:* Community support for GenieACS users
> *Subject:* Re: grabbing a live list of params
>
>
>
> Correct, you're not going to see that. You have to then pull back the
> device info and get that yourself. This just tells GenieACS to refresh
> those values from the CPE.
>
>
>
> On Fri, Jan 9, 2015 at 11:27 AM, Christopher Chance <
> cchance at newtechgrp.com> wrote:
>
> Don’t know if I’m missing something but in the below wheres the actual
> response when I ran it I got a similar response with the same param names ,
> device, timestamp and id…
>
>
>
> But the values for the results of the parameters are not their as is the
> case in your below example, where is the results of the kickurl, wait
> interval and connrequestaddress?
>
>
>
> *From:* Users [mailto:users-bounces at lists.genieacs.com] *On Behalf Of *Christopher
> Chance
> *Sent:* Friday, January 9, 2015 4:10 PM
> *To:* Community support for GenieACS users
> *Subject:* RE: grabbing a live list of params
>
>
>
> Not sure how but please please add this to the wiki section for
> getParameterValues
>
>
>
> *From:* Users [mailto:users-bounces at lists.genieacs.com
> <users-bounces at lists.genieacs.com>] *On Behalf Of *Dan Morphis
> *Sent:* Friday, January 9, 2015 4:06 PM
> *To:* Community support for GenieACS users
> *Subject:* Re: grabbing a live list of params
>
>
>
> POST a request to /devices/_modem_id_/tasks?timeout=3000&connection_request
>
>
>
> {
>
>   "name": "getParameterValues",
>
>   "parameterNames": [
>
>     "InternetGatewayDevice.ManagementServer.KickURL",
>
>     "InternetGatewayDevice.ManagementServer.CWMPRetryMinimumWaitInterval",
>
>     "InternetGatewayDevice.ManagementServer.UDPConnectionRequestAddress",
>
>     "some.parameter.you.want"
>
>   ]
>
> }
>
>
>
> The &connection_request in the URL tell GenieACS to try and talk to the
> CPE. If you get back a 202, that means the CPE didn't respond in a timely
> fashion.
>
>
>
> Here is my response for the above query:
>
> {
>
>   "name": "getParameterValues",
>
>   "parameterNames": [
>
>     "InternetGatewayDevice.ManagementServer.KickURL",
>
>     "InternetGatewayDevice.ManagementServer.CWMPRetryMinimumWaitInterval",
>
>     "InternetGatewayDevice.ManagementServer.UDPConnectionRequestAddress"
>
>   ],
>
>   "device": "00236a-96318REF-SR360NA0A4%2D0003196",
>
>   "timestamp": "2015-01-09T20:02:41.898Z",
>
>   "_id": "54b033e1f160d0240bbf0a28"
>
> }
>
>
>
> On Fri, Jan 9, 2015 at 8:20 AM, Christopher Chance <cchance at newtechgrp.com>
> wrote:
>
> How would I go about pulling a list of say 6-7 different stats from a cpe
> (preferably live not queued) via geniefs, and have the results returned by
> json.
>
>
>
> I want to pull a few vars out to perform signal tests from my oss system,
> but the API docs  are a bit sparse in regards to the getparams
>
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
>
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20150109/33417cc6/attachment.html>