Parameters doesn't show up

Sergio Fernández sergio.fernandez at electronicamartinez.com
Wed Sep 30 05:02:20 EDT 2015


Today I tried sending commands to the CPE. The CPE answered me with a 
401 Unauthorized. I deactivated the login to the CPE and now I can 
commit tasks like rebooting it. But the problem still persists, I can't 
make all the parameters to appear. When I send a getParameterValues on 
the InternetGatewayDevice option, it shows me that it has invalid 
arguments. This doesn't happen, for example, if I do it for 
InternetGatewayDevice.DeviceSummaryInternetGatewayDevice:1.1[](Baseline:1, 
EthernetLAN:1, USBLAN:1, WiFiLAN:1, ADSLWAN:1, Time:1, IPPing:1, 
ATMLoopback:1, DSLDiagnostics:1, DeviceAssociation:1).
There are parameters that fault, others that doesn't...

Thank you for your help and dedication.

El 29/09/15 a las 13:02, Sergio Fernández escribió:
> Now after doing this, I can see that the CPE still makes an inform 
> every 5 seconds. The CPE wasn't doing this before! but the list of 
> available parameters is still so short.
>
> El 29/09/15 a las 12:59, Sergio Fernández escribió:
>> I've tried again with another user/pass and the problem still 
>> persists, and I've tried deleting the cpe and rebooting the server 
>> also, refreshing InternetGatewayDevice tells me "Invalid arguments" 
>> under the "Fault" column.
>>
>> Thank you.
>>
>> El 29/09/15 a las 10:20, Dariusz Szymański escribió:
>>> You are sure that your connection request username/password match to
>>> auth.js?
>>> If yes then have yyou tried to refresh on the InternetGatewayDevice
>>> paramerer, or try to remove the device?
>>>
>>>
>>> -----Original Message-----
>>> From: Users [mailto:users-bounces at lists.genieacs.com] On Behalf Of 
>>> Sergio
>>> Fernández
>>> Sent: Tuesday, September 29, 2015 10:16 AM
>>> To: Community support for GenieACS users <users at lists.genieacs.com>
>>> Subject: Re: Parameters doesn't show up
>>>
>>> Thank you for answering me.
>>>
>>> I've changed the parameter options, cleared them... To see if it 
>>> helps but
>>> nothing. You can see the parameters of the CPE in the image attached.
>>>
>>> I've also put an user/pass in auth.js and the same in the CPE but 
>>> it's still
>>> the same.
>>>
>>> The thing that makes me wonder why is not working is because the CPE 
>>> sends
>>> all his parameters in the pcap file I sent in the email before, but 
>>> GenieACS
>>> seems like not picking it up correctly and making the CPE to 
>>> disconnect.
>>>
>>> Thank you a lot, guys!
>>>
>>> El 29/09/15 a las 09:30, Dariusz Szymański escribió:
>>>> Hi,
>>>>
>>>> I had the same issue, the problem was that there ware some custom
>>>> connection request username and password on the cpe so acs could't
>>>> connect to it and get the parameters.
>>>>
>>>> Darek Sz.
>>>>
>>>> -----Original Message-----
>>>> From: Users [mailto:users-bounces at lists.genieacs.com] On Behalf Of
>>>> Sergio Fernández
>>>> Sent: Monday, September 28, 2015 12:32 PM
>>>> To: Community support for GenieACS users <users at lists.genieacs.com>
>>>> Subject: Re: Parameters doesn't show up
>>>>
>>>> Thank you, Zaid
>>>>
>>>> I've mounted again GenieACS and found that I always suffer this error.
>>>> Adding the option "COOKIES_PATH" : "/" to config.json didn't help
>>>>
>>>> I also have noticed that when the CPE first contacts with the ACS it
>>>> sends the whole XML file (with all the parameters) but maybe the
>>>> GenieACS doesn't know how to get them. Then, as you can see on the
>>>> pcap file, there's no more connections from the CPE. (In the CPE I
>>>> have set to inform every 30 seconds, this worked a month ago, so it
>>>> may be not a problem of the CPE, but no clue of what's happening)
>>>>
>>>> Thank you!
>>>>
>>>> Sergio Fernández
>>>>
>>>> El 04/09/15 a las 01:45, Zaid Abdulla escribió:
>>>>> On Tue, Sep 1, 2015, at 01:46 PM, Sergio Fernández wrote:
>>>>>> Hello!
>>>>>>
>>>>>> I've mounted a second server for testing inside a VMware.
>>>>>>
>>>>>> I connected a Tenda W300D and some parameters appear but I can't
>>>>>> make the rest of the parameters to be shown.
>>>>>> Here I send you the .dump attached. What I can see is that the
>>>>>> parameters I can see are in this dump but I can't see the other.
>>>>>>
>>>>>> In the first machine I installed GenieACS in, I didn't have these
>>>>>> problems with these types of router. I don't know what is happening.
>>>>> Looks like the common cookies issue. Try adding the following option
>>>>> to
>>>>> config.json:
>>>>>
>>>>>        "COOKIES_PATH" : "/"
>>>>>
>>>>> If this doesn't help, try to capture the communication using tcpdump
>>>>> or Wireshark and look for the cookie headers of the CPE request that
>>>>> comes immediately after the very last ACS request you see in the dump
>>>>> file you attached.
>>>>>
>>>>> Zaid
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.genieacs.com
>>>>> http://lists.genieacs.com/mailman/listinfo/users
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.genieacs.com
>>>> http://lists.genieacs.com/mailman/listinfo/users
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.genieacs.com
>>> http://lists.genieacs.com/mailman/listinfo/users
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.genieacs.com
>> http://lists.genieacs.com/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20150930/c68307a5/attachment-0001.html>


More information about the Users mailing list