AW: AW: cwmp worker died on processing inform

[Michael Neumann]

Hi Dan,

thank you for your feedback - that was only a test setup to connect the device to the acs from Zaid. Typical production setup we have mngt, voice and internet vlans.



Mit freundlichen Grüßen/Best Regards
 
Michael Neumann
Engineering
mn at JM-DATA.at
 
 

 
______________________________________________________
 
J M - D A T A   T e l e k o m   G m b H
4020 Linz, Am Winterhafen 13, Austria
T +43 50 / 30 50 80 - 0  F +43 50 / 30 50 80 - 20
E office at JM-DATA.at   W http://www.JM-DATA.at
______________________________________________________
 
* IT-SOLUTIONS & TELECOM *
______________________________________________________
Es gelten die AGBs von JM-DATA GmbH - http://www.JM-DATA.at/agb
Terms and conditions apply to JM-DATA GmbH - http://www.JM-DATA.at/agb
 
Besuchen Sie uns auch auf Facebook: http://www.facebook.com/jmdata

-----Ursprüngliche Nachricht-----
Von: Users [mailto:users-bounces at lists.genieacs.com] Im Auftrag von Dan Morphis
Gesendet: Donnerstag, 12. Mai 2016 04:46
An: Community support for GenieACS users <users at lists.genieacs.com>
Betreff: Re: AW: cwmp worker died on processing inform

You probably don't want your ACS to be accessible from the world. And you probably want to require a username and password for the connection request. 

If you have control over the DSLAM consider doing a separate vci/vpi for the management network and bind the tr069 service on the CPE to the mgmt network interface. 

-dan

> On May 10, 2016, at 6:46 AM, Michael Neumann <mn at jm-data.at> wrote:
> 
> Hello Zaid,
> 
> i have connected now a test box in the office ...
> 
> TR-069 URL http://188.166.93.165:7547
> No user no password
> 
> Connection Request URL: http://62.93.81.70:7170/ConnectionRequest
> 
> 
> Please can you check if you get an inform message from the box.
> 
> 
> 
> I have tested already the master branch from the genieacs - with the same result.
> 
> 
> Mit freundlichen Grüßen/Best Regards
>  
> Michael Neumann
> Engineering
> mn at JM-DATA.at
>  
>  
> 
>  
> ______________________________________________________
>  
> J M - D A T A   T e l e k o m   G m b H
> 4020 Linz, Am Winterhafen 13, Austria
> T +43 50 / 30 50 80 - 0  F +43 50 / 30 50 80 - 20
> E office at JM-DATA.at   W http://www.JM-DATA.at
> ______________________________________________________
>  
> * IT-SOLUTIONS & TELECOM *
> ______________________________________________________
> Es gelten die AGBs von JM-DATA GmbH - http://www.JM-DATA.at/agb Terms 
> and conditions apply to JM-DATA GmbH - http://www.JM-DATA.at/agb
>  
> Besuchen Sie uns auch auf Facebook: http://www.facebook.com/jmdata
> 
> 
> -----Ursprüngliche Nachricht-----
> Von: Users [mailto:users-bounces at lists.genieacs.com] Im Auftrag von 
> Zaid Abdulla
> Gesendet: Donnerstag, 05. Mai 2016 11:32
> An: Community support for GenieACS users <users at lists.genieacs.com>
> Betreff: Re: cwmp worker died on processing inform
> 
>> On Wed, 2016-05-04 at 21:06 +0000, Michael Neumann wrote:
>> please can someone help me to find out what's wrong with that inform?
>> Other devices are working fine - so I think this device is sending a 
>> sloppy inform.
> 
> The inform message looks fine as far as I can tell. Could you please 
> point your device to this ACS URL so I can try to troubleshoot it: 
> http
> ://188.166.93.165:7547
> 
>> I tried already to apply the fix from that issue ...
>> https://github.com/zaidka/genieacs/issues/17#issuecomment-45466577 - 
>> but still not working
> 
> I don't believe that fix is relevant to this problem.
> 
> --
> Zaid Abdulla
> zaid at genieacs.com
> 
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________
Users mailing list
Users at lists.genieacs.com
http://lists.genieacs.com/mailman/listinfo/users