Problem with CPE reconnection

[Dan Morphis]

Try to initiate a connection from the ACS to the CPE. To do this, pick a
simple parameter (like
InternetGatewayDevice.ManagementServer.PeriodicInformInterval) and do a
getParameterValues on it. This will cause GenieACS to make a connection to
the ConnectionRequestURL on the CPE. If TR069 client on the CPE hasn't
crashed, then the CPE should then make connection to the ACS.

-dan


On Thu, Mar 2, 2017 at 7:37 AM, Jose Vela Delgado <josevelacisco at gmail.com>
wrote:

> Hello friends.
>
> Here I come with a small problem that I have with the GenieACS.
>
> It turns out I have a perfectly setup CPE session with the GenieACS, but
> when I turn it off, for example, for 10 minutes or less, when I turn it
> back on, it no longer reconnects to the GenieACS.
>
> The only thing that has solved it is to reset it from the factory. Is
> there any way to initiate connection with the GenieACS without getting to
> the end of factory reset?
>
> I await your comments.
> Greetings and thanks,
>
>
> Jose Vela
>
> *Técnico de Networking Routing y Switching.*
>
>
>
> Mira mi perfil profesional y conecta conmigo en LinkedIn pinchando en
> este enlace.
> <https://mailtrack.io/trace/link/e90c678ebe9a0a2b6e8e7e50dfc4e169ee8debe7?url=https%3A%2F%2Fes.linkedin.com%2Fin%2Fjose-vela-delgado&signature=a5c433e2b60df3f6>
>
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20170302/96fdf13c/attachment.html>