AW: Upgrade with Provision

[Margerita]

Hi,

I have correctly configured everything and can manually do upgrades.
Problem is, when doing this from provision script, Genie sends wrong 
filename to CPE:

tr69c:456.318:downloadGetData:235:Download file cannot be found from 
http://192.168.8.3:7567/undefined

UNDEFINED instead of a declared name.

I found a workaround to this by doing declaration in this way:
declare("Downloads.[FileType:1 Firmware Upgrade Image]", {path: 
1},{path: 2});

what makes Genie sending filename twice:
tr69c:456.318:downloadGetData:235:Download file cannot be found from 
http://192.168.8.3:7567/undefined failed. Status = 404
tr69c:456.591:downloadGetData:235:Download file cannot be found from 
http://192.168.8.3:7567/test.tar.gz failed. Status = 404

one wrong - undefined and second correct - test.tar.gz what makes CPE to 
start download and upgrade.

test.tar.gz is correct name and 404 here is intended.

I assume that it should not work that way and correct filename should be 
send at first time.


br,
-- 
Michal


W dniu 2017-10-12 o 08:00, Michael Neumann pisze:
> Hi Michal,
>
> do you know the setup for the file server ip?
>
> https://github.com/zaidka/genieacs/wiki/GenieACS-General-Config
>
> You can check with tcpdump port 7567 if you get requests on your file server ....
>
>
> Best Regards
>
> Michael Neumann
>
> -----Ursprüngliche Nachricht-----
> Von: Users [mailto:users-bounces at lists.genieacs.com] Im Auftrag von Margerita
> Gesendet: Mittwoch, 11. Oktober 2017 23:19
> An: Community support for GenieACS users <users at lists.genieacs.com>
> Betreff: Upgrade with Provision
>
> Hi,
>
> I'm trying do make update with Provision script similar to one in Wiki:
>
>     declare("Downloads.[FileType:1 Firmware Upgrade Image]", {path: 1},
> {path: 1});
>     declare("Downloads.[FileType:1 Firmware Upgrade Image].FileName",
> {value: 1}, {value: "test.tar.gz"});
>     declare("Downloads.[FileType:1 Firmware Upgrade Image].Download",
> {value: 1}, {value: Date.now()});
>
> but when doing it in this way CPE always try to download wrong, 'undefined' file:
>
>    tr69c:215.523:downloadGetData:235:Download file cannot be found from http://192.168.8.3:7567/undefined failed. Status = 404
>
> after searching what is wrong I found, that setting:
>     declare("Downloads.[FileType:1 Firmware Upgrade Image]", {path: 1},
> {path: 2});
>
> sends file to CPE two times and second one is correct, so update is
> successful:
>
> tr69c:456.318:downloadGetData:235:Download file cannot be found from http://192.168.8.3:7567/undefined failed. Status = 404 tr69c:456.591:downloadGetData:235:Download file cannot be found from http://192.168.8.3:7567/test.tar.gz failed. Status = 404
>
> (in exaple here I used non-existing filename 'test.tar.gz' to get it logged instead of upgrading CPE).
>
> What should be correct syntax to have this working without workaround I found?
>
> br,
> --
> Michal
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users