New Debian 8 install

eric at aisling-technologies.com eric at aisling-technologies.com
Sat Oct 14 14:44:53 EDT 2017 

Ok, so things were going great until I rebooted.  Now when I try to start the services I get the following…

 

● genieacs-gui.service - GUI for GenieACS

   Loaded: loaded (/etc/systemd/system/genieacs-gui.service; enabled)

   Active: failed (Result: exit-code) since Sat 2017-10-14 18:39:05 UTC; 3min 40s ago

  Process: 495 ExecStart=/root/.rbenv/shims/bundle exec rails s -e development --bind 0.0.0.0 --port 80 (code=exited, status=203/EXEC)

Main PID: 495 (code=exited, status=203/EXEC)

 

Oct 14 18:39:05 ip-172-31-0-251 systemd[1]: Started GUI for GenieACS.

Oct 14 18:39:05 ip-172-31-0-251 systemd[495]: Failed at step EXEC spawning /root/.rbenv/shims/bundle: No such file or directory

Oct 14 18:39:05 ip-172-31-0-251 systemd[1]: genieacs-gui.service: main process exited, code=exited, status=203/EXEC

Oct 14 18:39:05 ip-172-31-0-251 systemd[1]: Unit genieacs-gui.service entered failed state.

admin at ip-172-31-0-251:/etc/systemd/system$

Any thoughts?

Thanks.

 

From: Users [mailto:users-bounces at lists.genieacs.com] On Behalf Of eric at aisling-technologies.com
Sent: Thursday, October 12, 2017 1:39 AM
To: 'Community support for GenieACS users' <users at lists.genieacs.com>
Subject: RE: New Debian 8 install

 

I’M IN!!!  Many thanks.  Now comes the fun part, learning how to use it.

 

Thank you again.

 

From: Users [mailto:users-bounces at lists.genieacs.com] On Behalf Of Sergio Fernández
Sent: Wednesday, October 11, 2017 2:17 PM
To: Community support for GenieACS users <users at lists.genieacs.com <mailto:users at lists.genieacs.com> >
Subject: RE: New Debian 8 install

 

7557 is the genieacs-nbi binary port. That means genieacs-GUI cannot reach it. Most of the times that means the binary is not running. You will have to start it. But you should also start the binaries genieacs-cwmp and genieacs-fs.

 

I have a repo here to make the binaries services through systemd, in order to start/stop the binaries through "service genieacs-cwmp restart", for example. The repo is here: https://github.com/DrumSergio/genieacs-services You would need to modify the files and set them up like the following: 

 

cp init-cwmp /etc/systemd/system/genieacs-cwmp.service

 

systemctl enable genieacs-cwmp

 

Hope that helps. 

Best regards

 

Sergio Fernández Rubio - https://www.linkedin.com/in/sergiofdz
(+34) 687 016 994
sergio19932 at gmail.com <mailto:sergio19932 at gmail.com> 

 

El 11 oct. 2017 18:15, <eric at aisling-technologies.com <mailto:eric at aisling-technologies.com> > escribió:

So, I think I’m getting closer, I’m actually able to reach the GUI url now, but receive the following message.

              Failed to open TCP connection to localhost:7557 (Connection refused - connect(2) for "localhost" port 7557)

 

I did confirm that the port is open on my firewall.

 

Thank you

 

From: Users [mailto:users-bounces at lists.genieacs.com <mailto:users-bounces at lists.genieacs.com> ] On Behalf Of Eric Whalen
Sent: Wednesday, October 11, 2017 11:28 AM
To: Community support for GenieACS users <users at lists.genieacs.com <mailto:users at lists.genieacs.com> >
Subject: Re: New Debian 8 install

 

Thanks for the quick response.  I do understand that it's a permission thing, but I'm pretty new to this and having a difficult time tracking it down.  Any thoughts?

I will update Ruby today.

Thanks

From: Sergio Fernández

Sent: Wednesday, October 11, 1:09 AM

Subject: Re: New Debian 8 install

To: Community support for GenieACS users

Good morning, Eric.

Right now I have it installed in Debian 9, although the MongoDB binaries are not released yet. But I don't have the scripts.

This is another guide I wrote for Ubuntu 14.04. Really it's not that different, the problems that arise can be solved easily sometimes with a little of try-and-error: https://github.com/zaidka/genieacs/wiki/GenieACS-v1.1.x-installation-in-Ubuntu-14.04-Server

Anyway, the logs seem like a "permission denied" error. So start by taking that into account! :) And another thing, right now I am using ruby version 2.4.2 and it is working good, so I would update from 2.3.0 because that is an old release.

Best regards.

Sergio Fernández Rubio - https://www.linkedin.com/in/sergiofdz/

(+34) 687 016 994 <tel:+34%20687%2001%2069%2094> 

CEO @ ACSdesk

https://acsdesk.com

2017-10-11 1:52 GMT+02:00 <eric at aisling-technologies.com <mailto:eric at aisling-technologies.com> >:

Here is more info…

 

admin at ip-172-31-0-251:/opt$ ./genieacs-start.sh

failed to connect to server: Connection refused

arranging in: tiled

GenieACS has been started in tmux session 'geneiacs'

To attach to session, use: tmux attach -t genieacs

To switch between panes use Ctrl+B-ArrowKey

To deattach, press Ctrl+B-D

To stop GenieACS, use: ./genieacs-stop.sh

 

rails server -b 0.0.0.0

admin at ip-172-31-0-251:/opt$ cd genieacs-gui

admin at ip-172-31-0-251:/opt/genieacs-gui$ rails server -b 0.0.0.0

=> Booting WEBrick

=> Rails 4.1.16 application starting in development on http://0.0.0.0:3000

=> Run `rails server -h` for more startup options

=> Notice: server is listening on all interfaces (0.0.0.0). Consider using 127.0.0.1 (--binding option)

=> Ctrl-C to shutdown server

Exiting

/usr/local/lib/ruby/gems/2.3.0/gems/rack-1.5.5/lib/rack/server.rb:332:in `initialize': Permission denied @ rb_sysopen - /opt/genieacs-gui/tmp/pids/server.pid (Errno::EACCES)

        from /usr/local/lib/ruby/gems/2.3.0/gems/rack-1.5.5/lib/rack/server.rb:332:in `open'

        from /usr/local/lib/ruby/gems/2.3.0/gems/rack-1.5.5/lib/rack/server.rb:332:in `write_pid'

        from /usr/local/lib/ruby/gems/2.3.0/gems/rack-1.5.5/lib/rack/server.rb:254:in `start'

        from /usr/local/lib/ruby/gems/2.3.0/gems/railties-4.1.16/lib/rails/commands/server.rb:69:in `start'

        from /usr/local/lib/ruby/gems/2.3.0/gems/railties-4.1.16/lib/rails/commands/commands_tasks.rb:81:in `block in server'

        from /usr/local/lib/ruby/gems/2.3.0/gems/railties-4.1.16/lib/rails/commands/commands_tasks.rb:76:in `tap'

        from /usr/local/lib/ruby/gems/2.3.0/gems/railties-4.1.16/lib/rails/commands/commands_tasks.rb:76:in `server'

        from /usr/local/lib/ruby/gems/2.3.0/gems/railties-4.1.16/lib/rails/commands/commands_tasks.rb:40:in `run_command!'

        from /usr/local/lib/ruby/gems/2.3.0/gems/railties-4.1.16/lib/rails/commands.rb:17:in `<top (required)>'

        from bin/rails:4:in `require'

        from bin/rails:4:in `<main>'

admin at ip-172-31-0-251:/opt/genieacs-gui$

From: Eric Whalen [mailto:eric at aisling-technologies.com <mailto:eric at aisling-technologies.com> ] 

Sent: Tuesday, October 10, 2017 2:04 PM

To: 'users at lists.genieacs.com <mailto:users at lists.genieacs.com> ' <users at lists.genieacs.com <mailto:users at lists.genieacs.com> >

Subject: New Debian 8 install

 

The install went well according to the instructions in the docs session, but when I run genieasc-start.sh I get the message “failed to connect to server: No such file or directory” and the GUI is not available.  What am I missing?

 

Thanks.

_______________________________________________

Users mailing list

Users at lists.genieacs.com <mailto:Users at lists.genieacs.com> 

http://lists.genieacs.com/mailman/listinfo/users

 


_______________________________________________
Users mailing list
Users at lists.genieacs.com <mailto:Users at lists.genieacs.com> 
http://lists.genieacs.com/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20171014/7b79e4db/attachment-0001.html>

More information about the Users mailing list