How to change device parameters on Huawei HG8245A

[miguelet tortosa]

Thank you, @Dermot Williams and @Dan Morphis.
I refered to the complete list of parameters that appears above.

Finally got it working.

The steps I have done have been:

- Enable debug. (I didn't localize any error inside the log. It continued
not showing all parameters)
- Delete entry of device in GenieACS and reset router.

After that, the device appeared in GenieACS with all options.

It seems that there was a device state that not showed all parameters
(Maybe it was the initial Bootstrap Inform that pointed Dermot). But after
reseting it to default parameters and reconfigure it with the same
configuration there appeared all the parameters in the ACS.





2015-07-16 17:53 GMT+02:00 Dan Morphis <dan at milkcarton.com>:

> I presume your talking about the list of parameters at the top of the
> page? Last Inform, Serial, Product Class, OUI, Manufacturer, HW/SW Version,
> etc? The list of items that show on the device page can be changed by
> editing genieacs-gui/config/summary_parameters.yml. Remember to restart the
> GUI if you make changes.
>
> Now as to why its not letting you edit those, when the CPE sends back the
> response for GetParameterValues, it indicates if the parameter is writable
> or not. The implementation on some CPE's is pure crap (Thomson TG585) and
> will say a parameter is writable when its not, and not writable when it is.
> Pretty much everything under InternetGatewayDevice.DeviceInfo will be
> read-only.
>
> If you want to add to, or remove the list of summary.* parameters, you
> will need to edit genieacs/config/parameters.json.
>
> Here are some of the ones I've added to our
> genieacs/config/parameters.json file:
>
> "InternetGatewayDevice.LANDevice./^\\d+$/.WLANConfiguration./^\\d+$/.SSID" : {"alias" : "summary.wlan.ssid"},
> "InternetGatewayDevice.LANDevice./^\\d+$/.WLANConfiguration./^\\d+$/.Enable" : {"alias" : "summary.wlan.enabled"},
> "InternetGatewayDevice.LANDevice./^\\d+$/.WLANConfiguration./^\\d+$/.Channel" : {"alias" : "summary.wlan.channel"},
> "InternetGatewayDevice.LANDevice./^\\d+$/.WLANConfiguration./^\\d+$/.PossibleChannels" : {"alias" : "summary.wlan.possibleChannels"},
> "InternetGatewayDevice.LANDevice./^\\d+$/.WLANConfiguration./^\\d+$/.PreSharedKey.1.KeyPassphrase" : {"alias" : "summary.wlan.passphrase"},
> "InternetGatewayDevice.LANDevice./^\\d+$/.WLANConfiguration./^\\d+$/.PreSharedKey.1.PreSharedKey" : {"alias" : "summary.wlan.presharedKey"},
> "InternetGatewayDevice.WANDevice./^\\d+$/.WANConnectionDevice.1.WANPPPConnection./^\\d+$/.Username" : {"alias" : "summary.pppoeUsername"},
> "InternetGatewayDevice.WANDevice./^\\d+$/.WANConnectionDevice.1.WANPPPConnection./^\\d+$/.Password" : {"alias" : "summary.pppoePassword"}
>
>
> And in my genieacs-gui/config/parameters.yml:
>
> WLAN SSID: summary.wlan.ssid
> WLAN Passphrase: summary.wlan.passphrase
> WLAN Enabled: summary.wlan.enabled
> WLAN Channel: summary.wlan.channel
> PPPoE Username: summary.pppoeUsername
> PPPoE Password: summary.pppoePassword
>
> If you want customize the parameters shown on the device list screen (/devices), edit genieacs-gui/config/index_parameters.yml.
>
>
> -dan
>
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20150717/ec2295cd/attachment.html>