Pushing file modem

Thu Jun 11 04:10:45 EDT 2015

Sorry to dig in it, I'm trying now to push a configuration file in a cisco
router and in the trace of the exchange we can see clearly the content of
the file (it's a show run btw), but the router send me back a internal
error's fault code. When I start a debug cwmp in the router didn't gave me
some precisions, just the exchange between the ACS and the router, it just
say me transfer complete.
Is the conf file ok if it's the show run ? or did you see something else ?

2015-06-02 17:58 GMT+02:00 Manny Veloso <manny.veloso at smartrg.com>:

>  There’s no reference implementation for tr-069, and there’s nobody to
> ask questions as an implementor, so the clients are all over the map. I
> understand the BBF may be fixing that at some point, but that point is in
> the future. TR-181 is a lot more complicated than TR-98, so it’ll only get
> worse.
>
>  As an aside, your problem with the config file may be this:
>
>  <24> Jun  2 09:47:15 [CWMP_DOWNLOAD] Config download: saving using
> filename '/dl
> /cwmp_tmp.ini'
> <24> Jun  2 09:47:45 [CWMP_DOWNLOAD] Config download failed: timeout
> connecting
> to the remote upgrade server
>
>  I’m not sure what params you had, but generally the file should be a
> full http URL. ie: http://your_server/filename.ini
>  --
> Manny Veloso
>  Sr. Solutions Engineer
> Smartrg.com
>
>   From: Fabien Bazille <fab.baz22 at gmail.com>
> Reply-To: Community support for GenieACS users <users at lists.genieacs.com>
> Date: Tuesday, June 2, 2015 at 5:43 AM
> To: Community support for GenieACS users <users at lists.genieacs.com>
> Subject: Re: Pushing file modem
>
>    Thanks you for your answer once again Dan,
>  I feel sad, this protocol exist since 2004 and many of CPE can't handle
> it  at 100%.
>
>  Regards
>
>  Fabien B
>
> 2015-06-02 14:03 GMT+02:00 Dan Morphis <dan at milkcarton.com>:
>
>>  I don't have anything to contribute on this issue except to say we
>> dumped the Thomson/Technicolor TG585's for the SmartRG 360n.
>>
>>  I found the 585 tr069 implementation to be really buggy, and the config
>> GUI a convoluted mess. I hope you have better luck with them.
>>
>>  To be fair, the 360 has its own set of defects, but the tr069 client on
>> it is at least consistent and conforms (mostly) to the spec.
>>
>> -dan
>>
>> On Jun 2, 2015, at 12:53 AM, Fabien Bazille <fab.baz22 at gmail.com> wrote:
>>
>>    Hi, I'm using Technicolor TG585n2 modem, and i'm trying tooo push the
>> configuration file in it, for that i uploaded the file via the file tab on
>> the web interface, and when i try to push the file, it fakes the download,
>> as you can see the genieacs-cwmp log:
>>
>> 2 Jun 10:31:42 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Inform (6
>> CONNECTION REQUEST); retry count 0
>> 2 Jun 10:31:42 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Started task
>> download(556d69edd808a21d223d1153)
>> 2 Jun 10:31:42 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Completed task
>> download(556d69edd808a21d223d1153)
>> 2 Jun 10:32:18 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Inform ();
>> retry count 1
>> 2 Jun 10:32:26 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Inform (2
>> PERIODIC,7 TRANSFER COMPLETE,M Download); retry count 0
>> 2 Jun 10:32:26 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Transfer
>> complete
>>
>>  In my modem:
>>
>> <24> Jun  2 09:47:10 [CWMP] Connection Request NOT ALLOWED.
>> <26> Jun  2 09:47:10 [CWMP] Connecting to server retry 0.
>> <26> Jun  2 09:47:10 [CWMP] Connected to server, starting transaction.
>> <26> Jun  2 09:47:10 [CWMP] > Inform (6 CONNECTION REQUEST)
>> <26> Jun  2 09:47:10 [CWMP] < Inform Response
>> <26> Jun  2 09:47:10 [CWMP] > Empty Post
>> <26> Jun  2 09:47:10 [CWMP] < Transfer Download
>> <26> Jun  2 09:47:10 [CWMP] Validate action
>> <26> Jun  2 09:47:10 [CWMP] > Download Response
>> <26> Jun  2 09:47:10 [CWMP] < Empty Response
>> <26> Jun  2 09:47:10 [CWMP] > Empty Post
>> <26> Jun  2 09:47:10 [CWMP] < HTTP code 400
>> <26> Jun  2 09:47:10 [CWMP] Transaction failed, closing connection.
>> <24> Jun  2 09:47:15 [CWMP_DOWNLOAD] Config download: saving using
>> filename '/dl
>> /cwmp_tmp.ini'
>> <24> Jun  2 09:47:45 [CWMP_DOWNLOAD] Config download failed: timeout
>> connecting
>> to the remote upgrade server
>> <26> Jun  2 09:47:45 [CWMP] Connecting to server retry 1.
>> <26> Jun  2 09:47:45 [CWMP] Connected to server, starting transaction.
>> <26> Jun  2 09:47:45 [CWMP] > Inform ()
>> <26> Jun  2 09:47:46 [CWMP] < Inform Response
>> <26> Jun  2 09:47:46 [CWMP] > Empty Post
>> <26> Jun  2 09:47:46 [CWMP] < Empty Response
>> <26> Jun  2 09:47:46 [CWMP] Transaction succeeded, closing connection.
>> <14> Jun  2 09:47:53 CONFIGURATION saved by TR69
>> <26> Jun  2 09:47:53 [CWMP] Connecting to server retry 0.
>> <26> Jun  2 09:47:54 [CWMP] Connected to server, starting transaction.
>> <26> Jun  2 09:47:54 [CWMP] > Inform (2 PERIODIC, 7 TRANSFER COMPLETE, M
>> Downloa
>> d)
>> <26> Jun  2 09:47:54 [CWMP] < Inform Response
>> <26> Jun  2 09:47:54 [CWMP] > Transfer Complete
>> <26> Jun  2 09:47:54 [CWMP] < Transfer Complete Response
>> <26> Jun  2 09:47:54 [CWMP] > Empty Post
>> <26> Jun  2 09:47:54 [CWMP] < Empty Response
>> <26> Jun  2 09:47:54 [CWMP] Transaction succeeded, closing connection.
>> <14> Jun  2 09:48:02 CONFIGURATION saved by TR69
>>
>>  I see connection request not allowed and i don't know why, there are no
>> login/password on the modem for cwmp
>>
>>  here is the cwmp config of the modem:
>>
>> {admin}=>cwmp config
>> State                                 : enabled
>> Mode                                  : full
>> Max Envelopes                         : 2
>> Session Timeout                       : 60
>> No Ip Timeout                         : 180
>> Connection Request Port               : 7547
>> Periodic Inform                       : enabled
>> Periodic Inform Interval              : 30 s
>> Periodic Inform Time                  : 0001-01-01T00:00:00Z
>> Connection Request                    : enabled
>> Connection Request UserName           :
>> Connection Request PassWord           : ********
>> Connection Request Path               : cwmp
>> Connection Request Authentication     : digest
>> Connection Request Throttling Number  : 1
>> Connection Request Throttling Time    : 0 s
>> Show passwords in IGD                 : enabled
>> Boot delay range between 0 and        : 0 s
>> Amendment 1 Session Termination       : disabled
>> Upgrade Delay                         : disabled
>> Upgrade Delay Time Out Action         : cancel
>> Persistent Subscriptions              : disabled
>> URL Source Interface                  : none
>>
>> ACS url        : http://185.48.254.18:7547/
>> ACS username   :
>> ACS password   : ********
>>
>>  There is no password it just display * anyway.
>>
>>  If someone as already perform something like that.
>>
>>  Regards,
>>
>>  Fabien B
>>
>>
>>     _______________________________________________
>> Users mailing list
>> Users at lists.genieacs.com
>> http://lists.genieacs.com/mailman/listinfo/users
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.genieacs.com
>> http://lists.genieacs.com/mailman/listinfo/users
>>
>>
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20150611/bdc8140f/attachment.html>