Pushing file modem

Dan Morphis dan at milkcarton.com
Thu Jun 11 05:10:36 EDT 2015 

Is there a log file/viewer for the Cisco? Can you manually load the config file on the cpe?

-dan

> On Jun 11, 2015, at 12:10 AM, Fabien Bazille <fab.baz22 at gmail.com> wrote:
> 
> Sorry to dig in it, I'm trying now to push a configuration file in a cisco router and in the trace of the exchange we can see clearly the content of the file (it's a show run btw), but the router send me back a internal error's fault code. When I start a debug cwmp in the router didn't gave me some precisions, just the exchange between the ACS and the router, it just say me transfer complete.
> Is the conf file ok if it's the show run ? or did you see something else ?
> 
> 2015-06-02 17:58 GMT+02:00 Manny Veloso <manny.veloso at smartrg.com>:
>> There’s no reference implementation for tr-069, and there’s nobody to ask questions as an implementor, so the clients are all over the map. I understand the BBF may be fixing that at some point, but that point is in the future. TR-181 is a lot more complicated than TR-98, so it’ll only get worse.
>> 
>> As an aside, your problem with the config file may be this:
>> 
>> <24> Jun  2 09:47:15 [CWMP_DOWNLOAD] Config download: saving using filename '/dl
>> /cwmp_tmp.ini'
>> <24> Jun  2 09:47:45 [CWMP_DOWNLOAD] Config download failed: timeout connecting
>> to the remote upgrade server
>> 
>> I’m not sure what params you had, but generally the file should be a full http URL. ie: http://your_server/filename.ini
>> -- 
>> Manny Veloso
>> Sr. Solutions Engineer
>> Smartrg.com
>> 
>> From: Fabien Bazille <fab.baz22 at gmail.com>
>> Reply-To: Community support for GenieACS users <users at lists.genieacs.com>
>> Date: Tuesday, June 2, 2015 at 5:43 AM
>> To: Community support for GenieACS users <users at lists.genieacs.com>
>> Subject: Re: Pushing file modem
>> 
>> Thanks you for your answer once again Dan,
>> I feel sad, this protocol exist since 2004 and many of CPE can't handle it  at 100%.
>> 
>> Regards
>> 
>> Fabien B
>> 
>> 2015-06-02 14:03 GMT+02:00 Dan Morphis <dan at milkcarton.com>:
>>> I don't have anything to contribute on this issue except to say we dumped the Thomson/Technicolor TG585's for the SmartRG 360n.
>>> 
>>> I found the 585 tr069 implementation to be really buggy, and the config GUI a convoluted mess. I hope you have better luck with them.
>>> 
>>> To be fair, the 360 has its own set of defects, but the tr069 client on it is at least consistent and conforms (mostly) to the spec. 
>>> 
>>> -dan
>>> 
>>> On Jun 2, 2015, at 12:53 AM, Fabien Bazille <fab.baz22 at gmail.com> wrote:
>>> 
>>>> Hi, I'm using Technicolor TG585n2 modem, and i'm trying tooo push the configuration file in it, for that i uploaded the file via the file tab on the web interface, and when i try to push the file, it fakes the download, as you can see the genieacs-cwmp log:
>>>> 
>>>> 2 Jun 10:31:42 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Inform (6 CONNECTION REQUEST); retry count 0
>>>> 2 Jun 10:31:42 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Started task download(556d69edd808a21d223d1153)
>>>> 2 Jun 10:31:42 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Completed task download(556d69edd808a21d223d1153)
>>>> 2 Jun 10:32:18 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Inform (); retry count 1
>>>> 2 Jun 10:32:26 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Inform (2 PERIODIC,7 TRANSFER COMPLETE,M Download); retry count 0
>>>> 2 Jun 10:32:26 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Transfer complete
>>>> 
>>>> In my modem:
>>>> 
>>>> <24> Jun  2 09:47:10 [CWMP] Connection Request NOT ALLOWED.
>>>> <26> Jun  2 09:47:10 [CWMP] Connecting to server retry 0.
>>>> <26> Jun  2 09:47:10 [CWMP] Connected to server, starting transaction.
>>>> <26> Jun  2 09:47:10 [CWMP] > Inform (6 CONNECTION REQUEST)
>>>> <26> Jun  2 09:47:10 [CWMP] < Inform Response
>>>> <26> Jun  2 09:47:10 [CWMP] > Empty Post
>>>> <26> Jun  2 09:47:10 [CWMP] < Transfer Download
>>>> <26> Jun  2 09:47:10 [CWMP] Validate action
>>>> <26> Jun  2 09:47:10 [CWMP] > Download Response
>>>> <26> Jun  2 09:47:10 [CWMP] < Empty Response
>>>> <26> Jun  2 09:47:10 [CWMP] > Empty Post
>>>> <26> Jun  2 09:47:10 [CWMP] < HTTP code 400
>>>> <26> Jun  2 09:47:10 [CWMP] Transaction failed, closing connection.
>>>> <24> Jun  2 09:47:15 [CWMP_DOWNLOAD] Config download: saving using filename '/dl
>>>> /cwmp_tmp.ini'
>>>> <24> Jun  2 09:47:45 [CWMP_DOWNLOAD] Config download failed: timeout connecting
>>>> to the remote upgrade server
>>>> <26> Jun  2 09:47:45 [CWMP] Connecting to server retry 1.
>>>> <26> Jun  2 09:47:45 [CWMP] Connected to server, starting transaction.
>>>> <26> Jun  2 09:47:45 [CWMP] > Inform ()
>>>> <26> Jun  2 09:47:46 [CWMP] < Inform Response
>>>> <26> Jun  2 09:47:46 [CWMP] > Empty Post
>>>> <26> Jun  2 09:47:46 [CWMP] < Empty Response
>>>> <26> Jun  2 09:47:46 [CWMP] Transaction succeeded, closing connection.
>>>> <14> Jun  2 09:47:53 CONFIGURATION saved by TR69
>>>> <26> Jun  2 09:47:53 [CWMP] Connecting to server retry 0.
>>>> <26> Jun  2 09:47:54 [CWMP] Connected to server, starting transaction.
>>>> <26> Jun  2 09:47:54 [CWMP] > Inform (2 PERIODIC, 7 TRANSFER COMPLETE, M Downloa
>>>> d)
>>>> <26> Jun  2 09:47:54 [CWMP] < Inform Response
>>>> <26> Jun  2 09:47:54 [CWMP] > Transfer Complete
>>>> <26> Jun  2 09:47:54 [CWMP] < Transfer Complete Response
>>>> <26> Jun  2 09:47:54 [CWMP] > Empty Post
>>>> <26> Jun  2 09:47:54 [CWMP] < Empty Response
>>>> <26> Jun  2 09:47:54 [CWMP] Transaction succeeded, closing connection.
>>>> <14> Jun  2 09:48:02 CONFIGURATION saved by TR69
>>>> 
>>>> I see connection request not allowed and i don't know why, there are no login/password on the modem for cwmp
>>>> 
>>>> here is the cwmp config of the modem:
>>>> 
>>>> {admin}=>cwmp config
>>>> State                                 : enabled
>>>> Mode                                  : full
>>>> Max Envelopes                         : 2
>>>> Session Timeout                       : 60
>>>> No Ip Timeout                         : 180
>>>> Connection Request Port               : 7547
>>>> Periodic Inform                       : enabled
>>>> Periodic Inform Interval              : 30 s
>>>> Periodic Inform Time                  : 0001-01-01T00:00:00Z
>>>> Connection Request                    : enabled
>>>> Connection Request UserName           :
>>>> Connection Request PassWord           : ********
>>>> Connection Request Path               : cwmp
>>>> Connection Request Authentication     : digest
>>>> Connection Request Throttling Number  : 1
>>>> Connection Request Throttling Time    : 0 s
>>>> Show passwords in IGD                 : enabled
>>>> Boot delay range between 0 and        : 0 s
>>>> Amendment 1 Session Termination       : disabled
>>>> Upgrade Delay                         : disabled
>>>> Upgrade Delay Time Out Action         : cancel
>>>> Persistent Subscriptions              : disabled
>>>> URL Source Interface                  : none
>>>> 
>>>> ACS url        : http://185.48.254.18:7547/
>>>> ACS username   :
>>>> ACS password   : ********
>>>> 
>>>> There is no password it just display * anyway.
>>>> 
>>>> If someone as already perform something like that.
>>>> 
>>>> Regards,
>>>> 
>>>> Fabien B
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.genieacs.com
>>>> http://lists.genieacs.com/mailman/listinfo/users
>>> 
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.genieacs.com
>>> http://lists.genieacs.com/mailman/listinfo/users
>> 
>> 
>> _______________________________________________
>> Users mailing list
>> Users at lists.genieacs.com
>> http://lists.genieacs.com/mailman/listinfo/users
> 
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20150611/d63d8417/attachment.html>

More information about the Users mailing list