Pushing file modem
Fabien Bazille
fab.baz22 at gmail.com
Fri Jun 12 03:57:24 EDT 2015
Yes if I copy all the text and enter it apply them or when I use the copy
command to the running-config there is no problem.
I didn't find any log or debug command who can help me.
2015-06-11 11:10 GMT+02:00 Dan Morphis <dan at milkcarton.com>:
> Is there a log file/viewer for the Cisco? Can you manually load the config
> file on the cpe?
>
> -dan
>
> On Jun 11, 2015, at 12:10 AM, Fabien Bazille <fab.baz22 at gmail.com> wrote:
>
> Sorry to dig in it, I'm trying now to push a configuration file in a cisco
> router and in the trace of the exchange we can see clearly the content of
> the file (it's a show run btw), but the router send me back a internal
> error's fault code. When I start a debug cwmp in the router didn't gave me
> some precisions, just the exchange between the ACS and the router, it just
> say me transfer complete.
> Is the conf file ok if it's the show run ? or did you see something else ?
>
> 2015-06-02 17:58 GMT+02:00 Manny Veloso <manny.veloso at smartrg.com>:
>
>> There’s no reference implementation for tr-069, and there’s nobody to
>> ask questions as an implementor, so the clients are all over the map. I
>> understand the BBF may be fixing that at some point, but that point is in
>> the future. TR-181 is a lot more complicated than TR-98, so it’ll only get
>> worse.
>>
>> As an aside, your problem with the config file may be this:
>>
>> <24> Jun 2 09:47:15 [CWMP_DOWNLOAD] Config download: saving using
>> filename '/dl
>> /cwmp_tmp.ini'
>> <24> Jun 2 09:47:45 [CWMP_DOWNLOAD] Config download failed: timeout
>> connecting
>> to the remote upgrade server
>>
>> I’m not sure what params you had, but generally the file should be a
>> full http URL. ie: http://your_server/filename.ini
>> --
>> Manny Veloso
>> Sr. Solutions Engineer
>> Smartrg.com
>>
>> From: Fabien Bazille <fab.baz22 at gmail.com>
>> Reply-To: Community support for GenieACS users <users at lists.genieacs.com>
>> Date: Tuesday, June 2, 2015 at 5:43 AM
>> To: Community support for GenieACS users <users at lists.genieacs.com>
>> Subject: Re: Pushing file modem
>>
>> Thanks you for your answer once again Dan,
>> I feel sad, this protocol exist since 2004 and many of CPE can't handle
>> it at 100%.
>>
>> Regards
>>
>> Fabien B
>>
>> 2015-06-02 14:03 GMT+02:00 Dan Morphis <dan at milkcarton.com>:
>>
>>> I don't have anything to contribute on this issue except to say we
>>> dumped the Thomson/Technicolor TG585's for the SmartRG 360n.
>>>
>>> I found the 585 tr069 implementation to be really buggy, and the
>>> config GUI a convoluted mess. I hope you have better luck with them.
>>>
>>> To be fair, the 360 has its own set of defects, but the tr069 client
>>> on it is at least consistent and conforms (mostly) to the spec.
>>>
>>> -dan
>>>
>>> On Jun 2, 2015, at 12:53 AM, Fabien Bazille <fab.baz22 at gmail.com> wrote:
>>>
>>> Hi, I'm using Technicolor TG585n2 modem, and i'm trying tooo push
>>> the configuration file in it, for that i uploaded the file via the file tab
>>> on the web interface, and when i try to push the file, it fakes the
>>> download, as you can see the genieacs-cwmp log:
>>>
>>> 2 Jun 10:31:42 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Inform (6
>>> CONNECTION REQUEST); retry count 0
>>> 2 Jun 10:31:42 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Started task
>>> download(556d69edd808a21d223d1153)
>>> 2 Jun 10:31:42 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Completed task
>>> download(556d69edd808a21d223d1153)
>>> 2 Jun 10:32:18 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Inform ();
>>> retry count 1
>>> 2 Jun 10:32:26 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Inform (2
>>> PERIODIC,7 TRANSFER COMPLETE,M Download); retry count 0
>>> 2 Jun 10:32:26 - A4B1E9-Technicolor%20TG582n-CP1243VFA1U: Transfer
>>> complete
>>>
>>> In my modem:
>>>
>>> <24> Jun 2 09:47:10 [CWMP] Connection Request NOT ALLOWED.
>>> <26> Jun 2 09:47:10 [CWMP] Connecting to server retry 0.
>>> <26> Jun 2 09:47:10 [CWMP] Connected to server, starting transaction.
>>> <26> Jun 2 09:47:10 [CWMP] > Inform (6 CONNECTION REQUEST)
>>> <26> Jun 2 09:47:10 [CWMP] < Inform Response
>>> <26> Jun 2 09:47:10 [CWMP] > Empty Post
>>> <26> Jun 2 09:47:10 [CWMP] < Transfer Download
>>> <26> Jun 2 09:47:10 [CWMP] Validate action
>>> <26> Jun 2 09:47:10 [CWMP] > Download Response
>>> <26> Jun 2 09:47:10 [CWMP] < Empty Response
>>> <26> Jun 2 09:47:10 [CWMP] > Empty Post
>>> <26> Jun 2 09:47:10 [CWMP] < HTTP code 400
>>> <26> Jun 2 09:47:10 [CWMP] Transaction failed, closing connection.
>>> <24> Jun 2 09:47:15 [CWMP_DOWNLOAD] Config download: saving using
>>> filename '/dl
>>> /cwmp_tmp.ini'
>>> <24> Jun 2 09:47:45 [CWMP_DOWNLOAD] Config download failed: timeout
>>> connecting
>>> to the remote upgrade server
>>> <26> Jun 2 09:47:45 [CWMP] Connecting to server retry 1.
>>> <26> Jun 2 09:47:45 [CWMP] Connected to server, starting transaction.
>>> <26> Jun 2 09:47:45 [CWMP] > Inform ()
>>> <26> Jun 2 09:47:46 [CWMP] < Inform Response
>>> <26> Jun 2 09:47:46 [CWMP] > Empty Post
>>> <26> Jun 2 09:47:46 [CWMP] < Empty Response
>>> <26> Jun 2 09:47:46 [CWMP] Transaction succeeded, closing connection.
>>> <14> Jun 2 09:47:53 CONFIGURATION saved by TR69
>>> <26> Jun 2 09:47:53 [CWMP] Connecting to server retry 0.
>>> <26> Jun 2 09:47:54 [CWMP] Connected to server, starting transaction.
>>> <26> Jun 2 09:47:54 [CWMP] > Inform (2 PERIODIC, 7 TRANSFER COMPLETE, M
>>> Downloa
>>> d)
>>> <26> Jun 2 09:47:54 [CWMP] < Inform Response
>>> <26> Jun 2 09:47:54 [CWMP] > Transfer Complete
>>> <26> Jun 2 09:47:54 [CWMP] < Transfer Complete Response
>>> <26> Jun 2 09:47:54 [CWMP] > Empty Post
>>> <26> Jun 2 09:47:54 [CWMP] < Empty Response
>>> <26> Jun 2 09:47:54 [CWMP] Transaction succeeded, closing connection.
>>> <14> Jun 2 09:48:02 CONFIGURATION saved by TR69
>>>
>>> I see connection request not allowed and i don't know why, there are no
>>> login/password on the modem for cwmp
>>>
>>> here is the cwmp config of the modem:
>>>
>>> {admin}=>cwmp config
>>> State : enabled
>>> Mode : full
>>> Max Envelopes : 2
>>> Session Timeout : 60
>>> No Ip Timeout : 180
>>> Connection Request Port : 7547
>>> Periodic Inform : enabled
>>> Periodic Inform Interval : 30 s
>>> Periodic Inform Time : 0001-01-01T00:00:00Z
>>> Connection Request : enabled
>>> Connection Request UserName :
>>> Connection Request PassWord : ********
>>> Connection Request Path : cwmp
>>> Connection Request Authentication : digest
>>> Connection Request Throttling Number : 1
>>> Connection Request Throttling Time : 0 s
>>> Show passwords in IGD : enabled
>>> Boot delay range between 0 and : 0 s
>>> Amendment 1 Session Termination : disabled
>>> Upgrade Delay : disabled
>>> Upgrade Delay Time Out Action : cancel
>>> Persistent Subscriptions : disabled
>>> URL Source Interface : none
>>>
>>> ACS url : http://185.48.254.18:7547/
>>> ACS username :
>>> ACS password : ********
>>>
>>> There is no password it just display * anyway.
>>>
>>> If someone as already perform something like that.
>>>
>>> Regards,
>>>
>>> Fabien B
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.genieacs.com
>>> http://lists.genieacs.com/mailman/listinfo/users
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.genieacs.com
>>> http://lists.genieacs.com/mailman/listinfo/users
>>>
>>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.genieacs.com
>> http://lists.genieacs.com/mailman/listinfo/users
>>
>>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20150612/dd987a69/attachment.html>
More information about the Users
mailing list