AW: Query Regarding GenieACS
Michael Neumann
mn at jm-data.at
Thu Jun 2 05:33:49 EDT 2016
Hi,
i would use little bit more ram e.g. 4 GB - but general for your setup a normal state of the art server should be ok.
But its like Oliver hve written - it will depends how current your data must be.
It’s a different when you want have 5 minutes counters for all devices up to date or when you have no general refreshes and a high inform interval ....
I think the second factor is if you have a customer specific preset config - or only a few global settings ... there I think there are 2 different philosophies ...
Make a event based config over the api or use the presets.
But I think for up to 1k devices it should not be any problem with a standard hardware.
Mit freundlichen Grüßen/Best Regards
Michael Neumann
Engineering
mn at JM-DATA.at
______________________________________________________
J M - D A T A T e l e k o m G m b H
4020 Linz, Am Winterhafen 13, Austria
T +43 50 / 30 50 80 - 0 F +43 50 / 30 50 80 - 20
E office at JM-DATA.at W http://www.JM-DATA.at
______________________________________________________
* IT-SOLUTIONS & TELECOM *
______________________________________________________
Es gelten die AGBs von JM-DATA GmbH - http://www.JM-DATA.at/agb
Terms and conditions apply to JM-DATA GmbH - http://www.JM-DATA.at/agb
Besuchen Sie uns auch auf Facebook: http://www.facebook.com/jmdata
Von: Users [mailto:users-bounces at lists.genieacs.com] Im Auftrag von Rupam Kumari
Gesendet: Donnerstag, 02. Juni 2016 11:23
An: Community support for GenieACS users <users at lists.genieacs.com>
Betreff: Re: Query Regarding GenieACS
Hello Team,
1. Approx how many devices can configure for mentioned configuration i.e 2 Cores, 2.x GHz,2 GB RAM and 100 GB HD ?
2. Min time interval that can we set for approx ten thousand device with same configuration ?
Regards,
Rupam kumari
On Thu, Jun 2, 2016 at 11:54 AM, Oliver Kraitschy <okraits at arcor.de> wrote:
Hi,
please don't send the same message twice - people will try to answer if they
can.
On Wed, Jun 01, 2016 at 07:55:20PM +0530, Rupam Kumari wrote:
> 1) Minimum required hardware configuration for GenieACS server with limited
> devices?
There's no definite answer to that question. How many devices are "limited
devices"? There are also other things which influence the needed resources -
inform interval, number of parameters, number of tasks running, etc. I guess
you won't get far with a Raspberry PI but a machine with 2 Cores, 2.x GHz,
2 GB RAM and 100 GB HD will be sufficient for a start.
> 2) which OS will be better to use CentOS or Ubuntu for GenieACS server ?
There's no difference, any recent linux distro which provides the needed base
technologies (node.js, mongo, redis, etc) will be good enough.
> 3) Minimum information interval for GenieACS if number of devices very
> large ?
The question is: how often do you need to get the status from your devices
(and how fast do you need to run tasks)?
Greetings,
Oliver
_______________________________________________
Users mailing list
Users at lists.genieacs.com
http://lists.genieacs.com/mailman/listinfo/users
More information about the Users
mailing list