CPE remote access

Florian Eckert eckert.florian at googlemail.com
Thu May 5 03:52:20 EDT 2016


Have you installed a tr069 Client in the cpe and point the URL to genieacs?
Am 05.05.2016 9:45 vorm. schrieb "Tigran" <work1415 at gmail.com>:

> Hello, first of all I'd like to mention that I am a "newbie", that's why
> I'd
> highly appreciate any detailed(transparent) answers concerning the usage of
> the program(genieacs).
> We have an ISP network of CPE's(DSL modems); most of the models are: Zhone
> 1511; Zhone 6511; they are configured manually(upon providing to the
> Subscribers), with some specific settings so that to meet our network
> parameters(mostly, for remote management), such as: IP over Ethernet; NAT
> enabled etc.
> The need to use the program(genieacs) is mostly, because of the lack of
> remote management of the CPE's(DSL modems) when they are on their "reset"
> state; on that state(reset) they are getting an IP address through their
> "bridge" interface and we no longer can access them remotely; however we
> are
> able to gain some info of those devices such as: the MAC address. I hope
> that with the help of the program(genieacs) we could gain access to those
> "reset" CPE's through TR069 protocol.
> Following this:
> https://github.com/zaidka/genieacs/wiki/Script-Installation---Ubuntu
> installation guide, I've managed to install and run the program(genieacs)
> on
> ubuntu 14.04 LTS.
> The program seems to run normally(genieacs-cwmp, genieacs-nbi, genieacs-fs
> and rails.); the gui of the web(http://127.0.0.1:3000) runs normal as
> well.
> I am now on a stage of configuration; I was reading the manuals on:
> https://github.com/zaidka/genieacs/ and following the API reference guide
> have tried to query to some devices(but with the lack of knowledge to where
> actually query; I have queried them in a cli session at genieacs installed
> folder) however so far I was not able to actually "locate" any CPE on our
> network..
> The main question is: how to proceed further after installing the
> program(genieacs)?
> I can provide more info, including the screen shots. Would appreciate Your
> responses; thanks in advance!
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20160505/01079eb5/attachment.html>


More information about the Users mailing list