202 Task queued but not processed

[Spencer Lambert]

Manoj,

The periodic inform is usually one of the values you set in the device UI, usually near the ACS URL.  It's also part of the device tree: InternetGatewayDevice.ManagementServer.PeriodicInformInterval

It sounds like you are using NAT.  In order to use GenieACS in a NAT'ed environment, you need to run a STUN server.

Here are two STUN servers that work with GenieACS.

https://github.com/jselbie/stunserver

https://github.com/coturn/coturn

The STUN server needs to run on the same server GenieACS is running, as Genie needs to send UDP messages over a shared port.

You also need to set the GenieACS config value UDP_CONNECTION_REQUEST_PORT to 3478, or what ever port the STUN service is running on.

Thanks,
Spence

> On April 23, 2017 at 1:41 PM Manoj C Jagatap <manoj.cjagatap at idnamedialabs.com> wrote:
> 
> 
>     Spencer,
> 
>     I sorry to ask you this, I am a fresher, could you tell me where can I find periodic inform.
> 
>     I have a firewall in Debian and also in openwrt. But I have enabled all ports of GenieACS, in openwrt I disabled the firewall. Let me know if there is anything else i need to do.
> 
>     Thank you.
> 
>     Manoj :)
> 
> 
>     On Fri, Apr 21, 2017, 19:55 Spencer Lambert <spence at isphelper.com mailto:spence at isphelper.com > wrote:
> 
>         > > 
> >         Manoj,
> > 
> >         It sounds like the TR-069 client you used previously wasn't listening for Connection Requests.   Glad EasyCWMP is working.
> > 
> >         1) What is your periodic inform?
> > 
> >         2) Is there a firewall between GenieACS and your device?
> > 
> >         Thanks,
> >         Spence 
> > 
> >             > > > On April 21, 2017 at 11:39 AM Manoj C Jagatap <manoj.cjagatap at idnamedialabs.com mailto:manoj.cjagatap at idnamedialabs.com > wrote:
> > > 
> > >             Hi Spencer,
> > > 
> > >             Thaks for the quick reply,
> > > 
> > >             I tried that, still I was getting the same error.
> > > 
> > >             So I decided to go for EasyCWMP, After installing EasyCWMP, All tasks are working.:)
> > > 
> > >             I am using GenieACS Gui, when I perform a task like reboot or factory reset, I get a notification Device is offline, but the device is right in front of me, it will take some time (30 sec to 1 min, sometimes more) and then the task will be completed. Couldn't understand this process.
> > > 
> > >             Please help me to understand why it is happening like this.
> > > 
> > >             Thank you.
> > > 
> > >             Regards
> > >             Manoj C Jagatap
> > > 
> > >             On Thu, Apr 20, 2017 at 7:28 PM Spencer Lambert <spence at isphelper.com mailto:spence at isphelper.com > wrote:
> > > 
> > >                 > > > > 
> > > >                 Manoj,
> > > > 
> > > >                 This may not be what is happening to you, but I've seen this behavior when new tasks are sent to the CPE close together.  For example, update a value then submit a reboot.
> > > > 
> > > >                 Does it always give an error 202, even when tasks are submitted 30 sec apart?
> > > > 
> > > >                 Are you using NAT?
> > > > 
> > > >                 Thanks,
> > > >                 Spence
> > > > 
> > > >                     > > > > > 
> > > > >                 > > > > 
> > > >                     > > > > > On April 20, 2017 at 4:34 PM Manoj C Jagatap <manoj.cjagatap at idnamedialabs.com mailto:manoj.cjagatap at idnamedialabs.com > wrote:
> > > > > 
> > > > >                     Hi Guys,
> > > > > 
> > > > >                     I am Manoj C Jagatap, I have set up GenieACS in Debian and FreeCwmp on TP Link WR740n running Openwrt Chaos Calmer 15.05.
> > > > > 
> > > > >                     I get the following error for the tasks like reboot and factory reset though the router shows up in GUI,
> > > > >                     HTTP/1.1 202 Task queued but not processed.
> > > > > 
> > > > >                     I don't see any error logs even though debug is set to true.
> > > > > 
> > > > >                     Hope you can help us figuring out the issue, looking forward to your response.
> > > > > 
> > > > >                     Please let us know if you need any more info.
> > > > > 
> > > > >                     Thank you.
> > > > > 
> > > > >                     Best Regards
> > > > >                     Manoj C Jagatap
> > > > > 
> > > > >                 > > > > 
> > > >                     > > > > > _______________________________________________
> > > > >                     Users mailing list
> > > > >                     Users at lists.genieacs.com mailto:Users at lists.genieacs.com
> > > > >                     http://lists.genieacs.com/mailman/listinfo/users
> > > > > 
> > > > >                 > > > >                 _______________________________________________
> > > >                 Users mailing list
> > > >                 Users at lists.genieacs.com mailto:Users at lists.genieacs.com
> > > >                 http://lists.genieacs.com/mailman/listinfo/users
> > > > 
> > > >             > > > 
> > >         > >         _______________________________________________
> >         Users mailing list
> >         Users at lists.genieacs.com mailto:Users at lists.genieacs.com
> >         http://lists.genieacs.com/mailman/listinfo/users
> > 
> >     > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20170423/08e69e14/attachment.html>