202 Task queued but not processed

Manoj C Jagatap manoj.cjagatap at idnamedialabs.com
Sun Apr 23 12:19:08 EDT 2017


Spencer,

Thanks for the info, I will try that and get back to you.

Manoj

On Sun, Apr 23, 2017, 21:25 Spencer Lambert <spence at isphelper.com> wrote:

> Manoj,
>
> The periodic inform is usually one of the values you set in the device UI,
> usually near the ACS URL.  It's also part of the device
> tree: InternetGatewayDevice.ManagementServer.PeriodicInformInterval
>
> It sounds like you are using NAT.  In order to use GenieACS in a NAT'ed
> environment, you need to run a STUN server.
>
> Here are two STUN servers that work with GenieACS.
>
> https://github.com/jselbie/stunserver
>
> https://github.com/coturn/coturn
>
> The STUN server needs to run on the same server GenieACS is running, as
> Genie needs to send UDP messages over a shared port.
>
> You also need to set the GenieACS config value UDP_CONNECTION_REQUEST_PORT
> to 3478, or what ever port the STUN service is running on.
>
> Thanks,
> Spence
>
> On April 23, 2017 at 1:41 PM Manoj C Jagatap <
> manoj.cjagatap at idnamedialabs.com> wrote:
>
> Spencer,
>
> I sorry to ask you this, I am a fresher, could you tell me where can I
> find periodic inform.
>
> I have a firewall in Debian and also in openwrt. But I have enabled all
> ports of GenieACS, in openwrt I disabled the firewall. Let me know if there
> is anything else i need to do.
>
> Thank you.
>
> Manoj :)
>
> On Fri, Apr 21, 2017, 19:55 Spencer Lambert <spence at isphelper.com> wrote:
>
> Manoj,
>
> It sounds like the TR-069 client you used previously wasn't listening for
> Connection Requests.   Glad EasyCWMP is working.
>
> 1) What is your periodic inform?
>
> 2) Is there a firewall between GenieACS and your device?
>
> Thanks,
> Spence
>
> On April 21, 2017 at 11:39 AM Manoj C Jagatap <
> manoj.cjagatap at idnamedialabs.com> wrote:
>
> Hi Spencer,
>
> Thaks for the quick reply,
>
> I tried that, still I was getting the same error.
>
> So I decided to go for EasyCWMP, After installing EasyCWMP, All tasks are
> working.:)
>
> I am using GenieACS Gui, when I perform a task like reboot or factory
> reset, I get a notification *Device is offline*, but the device is right
> in front of me, it will take some time (30 sec to 1 min, sometimes more)
> and then the task will be completed. Couldn't understand this process.
>
> Please help me to understand why it is happening like this.
>
> Thank you.
>
> Regards
> Manoj C Jagatap
>
> On Thu, Apr 20, 2017 at 7:28 PM Spencer Lambert <spence at isphelper.com>
> wrote:
>
> Manoj,
>
> This may not be what is happening to you, but I've seen this behavior when
> new tasks are sent to the CPE close together.  For example, update a value
> then submit a reboot.
>
> Does it always give an error 202, even when tasks are submitted 30 sec
> apart?
>
> Are you using NAT?
>
> Thanks,
> Spence
>
> On April 20, 2017 at 4:34 PM Manoj C Jagatap <
> manoj.cjagatap at idnamedialabs.com> wrote:
>
> Hi Guys,
>
> I am Manoj C Jagatap, I have set up GenieACS in Debian and FreeCwmp on TP
> Link WR740n running Openwrt Chaos Calmer 15.05.
>
> I get the following error for the tasks like reboot and factory reset
> though the router shows up in GUI,
> *HTTP/1.1 202 Task queued but not processed*.
>
> I don't see any error logs even though debug is set to true.
>
> Hope you can help us figuring out the issue, looking forward to your
> response.
>
> Please let us know if you need any more info.
>
> Thank you.
>
> Best Regards
> Manoj C Jagatap
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20170423/c6512bcf/attachment.html>


More information about the Users mailing list