GenieACS

[Dan Morphis]

All of this possible. If you want insight into what LAN traffic is doing,
see if your CPEs support sflow. The new SmartRG stuff is supposed to
support it. You will need to setup an sflow collector and config the CPE to
send the sflow data, but it will give you granular information about which
LAN devices are sending/receiving data.

-dan

On Mon, Jun 5, 2017 at 8:52 AM, Dan Therrien <dan at mofinetwork.com> wrote:

> Hi Dan, Thank you for responding.
>
>
>
> I see but this is assuming that the calculations are done on the device
> side. Always to focus them more on the server side if possible?
>
>
>
> Say router has values in inform parameter for RX/TX, server somehow takes
> this and adds them to values already stored in database?
>
> Just to clarify
>
>           1/ router’s diff bandwidth rx=500 tx=500
>
>           2/ Acs server already has values for rx/tx of 500
>
>           3/ server then takes routers values and adds them to database of
> rx=1000 tx=1000
>
>
>
> Is it wise to access database outside Acs? I was thinking of PHP?
>
>
>
> Is this possible?
>
> Regards
>
> Dan
>
>
>
> *From:* Dan Morphis [mailto:dan at milkcarton.com]
> *Sent:* June-05-17 12:31 PM
> *To:* dan at mofinetwork.com; Community support for GenieACS users
> *Subject:* Re: GenieACS
>
>
>
> You can do something like this, changing the values to fit your needs.
> This script will refresh the parameters listed every 1.5 days. Create this
> as a provision script, then create a preset to run the provision.
>
> log("Running Refresh_ATM_Stats");
>
> let twoDays = 1.5 * (24 * (60 * 60) * 1000); //1.5 days
>
> let twoDaysAgo = Date.now() - twoDays;
>
>
>
> let paramNames = [
>
>     "InternetGatewayDevice.DeviceInfo.UpTime",
>
>     'InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.
> UpstreamCurrRate',
>
>     'InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.
> DownstreamCurrRate',
>
>     'InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.
> UpstreamMaxRate',
>
>     'InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.
> DownstreamMaxRate',
>
>     'InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.
> UpstreamNoiseMargin',
>
>     'InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.
> DownstreamNoiseMargin',
>
>     "InternetGatewayDevice.WANDevice.12.WANDSLInterfaceConfig.
> UpstreamCurrRate",
>
>     "InternetGatewayDevice.WANDevice.12.WANDSLInterfaceConfig.
> DownstreamCurrRate",
>
>     "InternetGatewayDevice.WANDevice.12.WANDSLInterfaceConfig.
> UpstreamMaxRate",
>
>     "InternetGatewayDevice.WANDevice.12.WANDSLInterfaceConfig.
> DownstreamMaxRate",
>
>     'InternetGatewayDevice.WANDevice.12.WANDSLInterfaceConfig.
> UpstreamNoiseMargin',
>
>     'InternetGatewayDevice.WANDevice.12.WANDSLInterfaceConfig.
> DownstreamNoiseMargin'
>
> ];
>
>
>
> for(let key of paramNames) {
>
>     declare(key, {value: twoDaysAgo});
>
> }
>
>
>
> On Mon, Jun 5, 2017 at 6:57 AM, Dan Therrien <dan at mofinetwork.com> wrote:
>
> I’m trying to keep track of bandwidth usage and need some ideas.
>
>
>
> I would like to have the router inform the genieACS server of the current
> value tx/rx and have the server retrieve that routers id and add that value
> as Bandwidth Usage. I don’t know where I would put this scripting.
>
>
>
> Has anyone done this before?
>
>
>
> Thanks
>
>
>
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20170605/3b73f642/attachment-0001.html>