Preset doesn't start

[Dan Morphis]

I'm going to presume you have some system in place to track your subscribers, the device assigned to the subscriber and the voip number?

You need to build a bridge between the two. Then use flags to set the state of the device. For example in our setup, modems can be either bridged or routed. In genie I have a preset triggered on 1 BOOT that runs a provision script. This script then makes a rest call to our subscriber management software with the OUI, product class and serial number. The subscriber management software then figures out what state the modem should be in and returns that information via JSON. Once that information flows back to the provision script the appropriate tag is set on the device so the next phase of the process can happen.

In your setup, you can have the external system return the voip information and set that on the device.

This is using v1.1 of genie. 

-dan

> On May 2, 2017, at 11:09 PM, Marco Marino <marino.mrc at gmail.com> wrote:
> 
> What do you mean with 'different system'?
> I need to configure voip accounts on thousands of device filtered by mac addresses. Is there a better way to do this?
> Thank you
> 
> Il 02 Mag 2017 23:42, "Dan Morphis" <dan at milkcarton.com> ha scritto:
>> The route your going down (preset per device) is one fraught with performance issues. It is much better to Genie pull device specific parameters from a different system and set them, then to use presets. We went down that route before and struggled to do 20 r/s. By reworking our process to store the device specific settings in a different system and only pull them on bootstrap/config we can now do 40+ r/s hovering around 20% load.
>> 
>>> On Tue, May 2, 2017 at 4:48 AM, Marco Marino <marino.mrc at gmail.com> wrote:
>>> Hi, I'm trying to create a new preset for a device, using mac address
>>> as filter but it seems that the preset doesn't start. I have other
>>> devices of the same type (same vendor and model) associated to the
>>> same kind of preset (using different mac addresses) and all works
>>> well. Someone can help me to identify the problem?
>>> Thank you
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.genieacs.com
>>> http://lists.genieacs.com/mailman/listinfo/users
>> 
>> 
>> _______________________________________________
>> Users mailing list
>> Users at lists.genieacs.com
>> http://lists.genieacs.com/mailman/listinfo/users
>> 
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20170503/9d87266f/attachment.html>