Preset doesn't start

Michael Ducharme mducharme at gmail.com
Wed May 3 13:18:44 EDT 2017


Why is the preset system so inefficient? We had intended on using a preset
per device as well, just to set the PPPoE username and password and that is
it. Would we experience similar performance issues?

On Wed, May 3, 2017 at 5:37 AM, Dan Morphis <dan at milkcarton.com> wrote:

> I'm going to presume you have some system in place to track your
> subscribers, the device assigned to the subscriber and the voip number?
>
> You need to build a bridge between the two. Then use flags to set the
> state of the device. For example in our setup, modems can be either bridged
> or routed. In genie I have a preset triggered on 1 BOOT that runs a
> provision script. This script then makes a rest call to our subscriber
> management software with the OUI, product class and serial number. The
> subscriber management software then figures out what state the modem should
> be in and returns that information via JSON. Once that information flows
> back to the provision script the appropriate tag is set on the device so
> the next phase of the process can happen.
>
> In your setup, you can have the external system return the voip
> information and set that on the device.
>
> This is using v1.1 of genie.
>
> -dan
>
> On May 2, 2017, at 11:09 PM, Marco Marino <marino.mrc at gmail.com> wrote:
>
> What do you mean with 'different system'?
> I need to configure voip accounts on thousands of device filtered by mac
> addresses. Is there a better way to do this?
> Thank you
>
> Il 02 Mag 2017 23:42, "Dan Morphis" <dan at milkcarton.com> ha scritto:
>
>> The route your going down (preset per device) is one fraught with
>> performance issues. It is much better to Genie pull device specific
>> parameters from a different system and set them, then to use presets. We
>> went down that route before and struggled to do 20 r/s. By reworking our
>> process to store the device specific settings in a different system and
>> only pull them on bootstrap/config we can now do 40+ r/s hovering around
>> 20% load.
>>
>> On Tue, May 2, 2017 at 4:48 AM, Marco Marino <marino.mrc at gmail.com>
>> wrote:
>>
>>> Hi, I'm trying to create a new preset for a device, using mac address
>>> as filter but it seems that the preset doesn't start. I have other
>>> devices of the same type (same vendor and model) associated to the
>>> same kind of preset (using different mac addresses) and all works
>>> well. Someone can help me to identify the problem?
>>> Thank you
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.genieacs.com
>>> http://lists.genieacs.com/mailman/listinfo/users
>>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.genieacs.com
>> http://lists.genieacs.com/mailman/listinfo/users
>>
>> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20170503/f7b58c86/attachment.html>


More information about the Users mailing list