Access inform data after value change event

[Sergio Fernández]

In other commercial ACSs an option exist to get the parameters that have changed after some period of time. That way you don’t have to try one-by-one which is the correct one.

I’m building a fork in my own repositories:
https://github.com/DrumSergio/genieacs-gui
https://github.com/DrumSergio/genieacs
Currently the GUI adds two new things: Adding a way to query the full tree with a click, and another to compare it afterwards. You can view them on the GUI when you open the page of a CPE, down in the page.
Currently the option to compare is not completed, nor the way to query the full tree is tested. I’ve loaded the code from the sandbox.js (as virtual parameters use). Another way sure is better, but I was in a hurry when I committed it. If anyone knows to handle it better, PRs are welcome.

Thank you. 


> El 6 nov 2017, a las 13:39, Igor Smitran <sigor at blic.net> escribió:
> 
> As far as i know there is no way to know which parameter has been changed, unless you tell CPE which parameters to track.
> More about that you can see here:
> https://www.qacafe.com/tr-069-training/notifications/
> 
> Also, there are some parameters that CPE will always send notifications for, like IP address, connection URL etc.
> 
>> On 11/03/2017 12:02 PM, Sergio Fernández wrote:
>> Related to this question, do you know about any piece of software, that tells you which parameters have been changed through all the tree? So you get all the parameters, and then, whenever you want, compare the new parameters through a new GetParameters. This would be very useful to know which fields have changed. I think it would not be that difficult to create.
>> 
>> Thank you!
>> 
>> 
>> Sergio Fernández Rubio - https://www.linkedin.com/in/sergiofdz/
>> (+34) 687 016 994
>> CEO @ ACSdesk
>> https://acsdesk.com
>> 
>> 2017-10-31 12:39 GMT+01:00 Sergio Fernández <sergio19932 at gmail.com>:
>>> I am also interested about this topic. It is very useful when a CPE has more than 3.000 parameters and you don't know where is the parameter you need. You simply change it on the CPE, and wait for it to be shown in GenieACS. Something like that would be very useful while making provisioning flows, instead of waiting for the manufacturer to tell you.
>>> 
>>> Thank you!
>>> 
>>> Sergio Fernández Rubio - https://www.linkedin.com/in/sergiofdz/
>>> (+34) 687 016 994
>>> CEO @ ACSdesk
>>> https://acsdesk.com
>>> 
>>> 2017-10-06 12:25 GMT+02:00 Vaggelis Kapoulas <kapoulas at cti.gr>:
>>>> 
>>>> Hi,
>>>> 
>>>> I am also interested in this question. If anyone has an answer, or a suggestion, I will appreciate it.
>>>> 
>>>> Thanks in advance.
>>>> 
>>>> Vaggelis
>>>> 
>>>> 
>>>> 
>>>>> On 27/9/2017 5:09 μμ, Oliver Kraitschy wrote:
>>>>> Hi all,
>>>>> 
>>>>> how can I access the current inform's data, especially after a "4 VALUE CHANGE" event, from a provision or extension?
>>>>> 
>>>>> I want to know which device parameter has changed.
>>>>> 
>>>>> Thanks you very much in advance.
>>>>> 
>>>>> Greetings,
>>>>> Oliver
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.genieacs.com
>>>>> http://lists.genieacs.com/mailman/listinfo/users
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.genieacs.com
>>>> http://lists.genieacs.com/mailman/listinfo/users
>>> 
>> 
>> 
>> 
>> _______________________________________________
>> Users mailing list
>> Users at lists.genieacs.com
>> http://lists.genieacs.com/mailman/listinfo/users
> 
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20171106/6a9a5377/attachment.html>