Configure TR-069 Device

[raman at cloudconnexions.ca]

Thank you for your reply.

I an using Smart RG routers. The have TR-069 Built in and everything looks pretty straight forward.
I am definitely doing something wrong here.

Please take a look at the attached Image.

Thank you.

Sincerely,
Raman
Support Department
www.CloudConnexions.ca

----------------------------------------
From: George Chelidze <george.chelidze at magticom.ge>
Sent: 7/12/18 2:49 AM
To: users at lists.genieacs.com
Subject: Re: Configure TR-069 Device
On 07/11/2018 09:31 PM, raman at cloudconnexions.ca wrote:
Hi,

I have setup Genieacs GUI but not ablr to configure the device so it can show in the GUI.
Can you help me setup?

I have Installed it on remote server with Ubuntu 16.04

Thank you.

Hi Raman,

All you have to do on your device is to enable TR-069 and set ACS URL. By default ACS listens on tcp port 7547 for CWMP (protocol for your CPE to communicate with ACS). Make sure your CPE can reach this URL, enable debugging in genieacs/config/config.json. You can also use tcpdump on Genie machine to track incoming messages, if you don't see any incoming messages, you have to concentrate on your CPE/network.

Hope this helps.

Best regards,

George Chelidze


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20180712/6633378a/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 1531403638195.jpg
Type: image/jpeg
Size: 86099 bytes
Desc: not available
URL: <http://lists.genieacs.com/pipermail/users/attachments/20180712/6633378a/attachment-0001.jpg>