Presets not executing

[Grímur Daníelsson]

My guess was correct, I had to create a different preset that
fetches/refreshes the object from the CPE before attempting the value.
Works fine now.
Regards, Grimur
On Fri, 2018-06-08 at 16:28 +0000, Grímur Daníelsson wrote:
> I'm using v1.1.2 as stated in the original email.
> 
> The parameters exist in the object model of the CPEs. They are
> however custom for these CPEs, they aren't part of the TR069 data
> model.
> 
> In case it makes a difference, the whole object isn't pulled when
> doing a refresh of the device. It appears in the list but I have to
> refresh it manually to see its child parameters. Do I perhaps have to
> refresh the object before attempting to set a value inside it?
> 
> Regards, Grimur
> 
> On Fri, 2018-06-08 at 08:17 -0800, Dan Morphis wrote:
> > For the CPEs that the preset isn't working on, does the parameter
> > you're trying to set exist in their object model? You also don't
> > indicate what version of GenieACS you are using...
> > -dan
> > 
> > On Fri, Jun 8, 2018 at 7:58 AM, Grímur Daníelsson <grimurd at snerpa.i
> > s> wrote:
> > > Hi
> > > 
> > > I've set up presets(one per type of device) to change some
> > > parameters on a few different types of CPEs. The problem is that
> > > they only trigger for around 30% of those cpes.
> > > 
> > > I've got ~330 devices and it has only triggered for around a
> > > ~130. These devices are of different types and with different
> > > firmwares. Many of the devices that wont work are of the same
> > > type with the same firmware and configuration as those that do
> > > work. Theres nothing obviously different between those that work
> > > and those that don't.
> > > 
> > > There are no errors in the cwmp error log though I do get the
> > > occational "Preset hash mismatch" error but they don't seem to
> > > correlate with when the devices inform and there's too few of
> > > them to be triggered by informs.
> > > 
> > > When an inform comes from a device that should trigger the preset
> > > there are no GetParameterValues or SetParameterValues and retry
> > > count is always 0. 
> > > 
> > > It's like the presets don't trigger at all.
> > > 
> > > I've got GenieACS 1.1.2 and the latest commit from GenieacsGUI
> > > 
> > > Preset example:
> > > Name: Test Preset
> > > Weight: 0
> > > Channel: Empty
> > > Schedule: Empty
> > > Events: 2 PERIODIC
> > > Precondition:
> > >   - Product Class = VMG8924-B10D
> > >  - Tag != TestParameterSet
> > > Config:
> > >  - Set SomeParameter to SomeValue
> > >  - Add tag: TestParameterSet
> > > 
> > > Any idea what could be wrong?
> > > 
> > > Regards, Grímur
> > > _______________________________________________
> > > 
> > > Users mailing list
> > > 
> > > Users at lists.genieacs.com
> > > 
> > > http://lists.genieacs.com/mailman/listinfo/users
> > > 
> > > 
> > 
> > _______________________________________________Users mailing
> > listUsers at lists.genieacs.comhttp://lists.genieacs.com/mailman/listi
> > nfo/users
> _______________________________________________Users mailing
> listUsers at lists.genieacs.comhttp://lists.genieacs.com/mailman/listinf
> o/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20180608/3965c5a3/attachment-0001.html>