Provision not applied to cpe

[Ebenezer]

Hello Dan,

Thanks. I'd join the discord forum and post there.

Regards 

⁣Get BlueMail for Android ​

On 4 Apr 2019, 17:14, at 17:14, Dan Morphis <dan at milkcarton.com> wrote:
>On Wed, Apr 3, 2019 at 10:08 PM Ebenezer <eejukorlem at ipnxnigeria.net>
>wrote:
>
>> Hello Dan,
>>
>> Thank you for your response.
>>
>> Also, thanks for the correction on refreshing WLANConnection
>instances.
>>
>> "*Where aren't you seeing the values at? In the CPE GUI, or GenieACS
>> gui?"*
>> I do not see the values in the CPE GUI. *Only the SSID value on the
>> "WLANCommection.2" instance is set on both the CPE GUI and the
>GenieACS gui*.
>> All other values are set on the GenieACS gui, but do not show up on
>the CPE
>> gui.
>>
>>
>What does the device log say? Most CPEs unfortunately do not put all
>error
>messages in the syslog, and instead only go to the console. Open up
>your
>CPE and see if you have a 4 pin serial connection. If so, get a USB
>serial
>breakout cable
><https://www.ebay.com/itm/FT232RL-FTDI-USB-3-3V-5-5V-to-TTL-Serial-Adapter-Module-for-Arduino-Mini-Ports/222655931837>
>and attach it. You will probably see a lot more diagnostic information
>on
>the serial console then you will in the syslog (device log). Common
>serial
>parameters are 115200,8,N,1.
>
>
>*Additional info:** The CPE vendor supports setting values on the
>> "WANPPPConnection.1" instance only. Using the script in question, the
>> values on this instance are set on the GenieACS gui, **but the values
>are
>> not seen on the CPE GUI.*
>>
>> Try putting the bolded line in your provision script. This will cause
>genie to refresh the parameter names/values for the PPP connection.
>
>declare("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.*",
>null, {path: 1});
>log('Create WANPPPConnection objects if necessary');
>*declare("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.*.*",
>{path: now, value: now});*
>
>
>At any rate, I'd suggest you take this to the discord forum
><https://forum.genieacs.com/> as the mailing list is going to be shut
>down shortly.
>
>
>-dan
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Users mailing list
>Users at lists.genieacs.com
>http://lists.genieacs.com/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20190404/29a027a6/attachment.html>