Cisco's CPE resources exceeded

Tue Jun 2 03:30:57 EDT 2015

Here is the log and the cpe's configuration:

Config:
cwmp agent
 enable download
 enable
 management server url http://192.168.2.175:7547/

Log:
*Jun  2 07:26:33.252: CWMP: cwmp_process -> CWMP Engine shutdown
*Jun  2 07:26:34.428: CWMP: cwmp_process -> CWMP Engine started
*Jun  2 07:26:34.428: CWMP PROFILE: cwmp_generate_connection_request_URL ->
Conn
ectionRequestURL =
http://192.168.172.219/00000C/CISCO887%2dK9V01/FCZ154390G7/cw
mp

*Jun  2 07:26:34.472: CWMP PROFILE:
persist_store_cwmp_baseline_inventory_data -
> Successfully wrote 2936 bytes into file
*Jun  2 07:26:34.624: CWMP: cwmp_create_session -> Contacting URL
http://192.168
.2.175:7547/
*Jun  2 07:26:34.624: CWMP: cwmp_create_session -> Driving username
*Jun  2 07:26:34.624: CWMP: cwmp_create_session -> Driving password
*Jun  2 07:26:34.624: CWMP: cwmp_process_request_queue -> Queueing request
with
type 2
*Jun  2 07:26:34.624: CWMP: cwmp_https_send_message -> HTTP request type is
cwmp
:Inform, mime_type is text/xml
SOAPACTION: "cwmp:Inform"
< < < < < < < <
Inform
< < < < < < < <

*Jun  2 07:26:34.628: In cwmp_fwding_process, kill_cwmp_fwding 0
*Jun  2 07:26:34.628: cwmp_initialize_fwding -> CWMP_UP
*Jun  2 07:26:34.628: 1         TRUE    0.0.0.0         0.0.0.0
192.168.
172.253 254
*Jun  2 07:26:34.664: CWMP: cwmp_session_response_data -> HTTP ACS Response
code
 200
*Jun  2 07:26:34.664: CWMP: cwmp_session_response_data -> HTTP ACS Response
stri
ng OK
*Jun  2 07:26:34.664: CWMP: cwmp_soap_interpret -> Interpreting input SOAP
Envel
ope...
*Jun  2 07:26:34.664: CWMP: cwmp_ID -> ID 54 parsed successfully
*Jun  2 07:26:34.664: CWMP: cwmp_MaxEnvelopes -> MaxEnvelopes 1 parsed
successfu
lly
> > > > > > > >
InformResponse
> > > > > > > >
*Jun  2 07:26:34.664: CWMP: cwmp_run -> Close pending ...
*Jun  2 07:26:34.664: CWMP: cwmp_https_send_message -> HTTP message is
Empty Req
uest/Response
< < < < < < < <
EMPTY REQUEST
< < < < < < < <

*Jun  2 07:26:34.668: CWMP: cwmp_session_response_data -> HTTP ACS Response
code
 204
*Jun  2 07:26:34.672: CWMP: cwmp_session_response_data -> HTTP ACS Response
stri
ng
> > > > > > > >
EMPTY RESPONSE
> > > > > > > >e
*Jun  2 07:26:34.672: CWMP: cwmp_https_close_connection -> Session and
Connectio
n to 192.168.2.175 closed successfull

Maybe i have to adjust some parameters in config.json ?

2015-06-01 15:35 GMT+02:00 Dan Morphis <dan at milkcarton.com>:

> What does the syslog on the cpe contain? That will likely contain info on
> why the cpe is faulting. Did you change the parameters and restart the cwmp
> process?
>
> -dan
>
> On May 31, 2015, at 11:53 PM, Fabien Bazille <fab.baz22 at gmail.com> wrote:
>
> Thank you Manny,
>
> Dan, here is the log:
> 00000C-CISCO887%252dK9V01-FCZ154390G7: Inform (1 BOOT); retry
> count 0
>
> 00000C-CISCO887%252dK9V01-FCZ154390G7: Started task
> refreshObject(556c0ec04de397db3655201c)
>
> 00000C-CISCO887%252dK9V01-FCZ154390G7: Fault response for task
> 556c0ec04de397db3655201c. Retrying after 300 seconds.
>
> And the Fault tells me resource exceeded.
>
>
>
> 2015-05-29 18:25 GMT+02:00 Manny Veloso <manny.veloso at smartrg.com>:
>
>>  That error is probably the Cisco CWMP client barfing. Some CWMP clients
>> run out of memory when dumping their whole tr-98/181 tree, especially the
>> older ones.
>>
>>  The good thing is it tells you it’s dead, instead of just, well, dying.
>> The below parameters should help.
>>  --
>> Manny Veloso
>>  Sr. Solutions Engineer
>> Smartrg.com
>>
>>   From: Dan Morphis <dan at milkcarton.com>
>> Reply-To: Community support for GenieACS users <users at lists.genieacs.com>
>> Date: Friday, May 29, 2015 at 8:55 AM
>> To: Community support for GenieACS users <users at lists.genieacs.com>
>> Subject: Re: Cisco's CPE resources exceeded
>>
>>   Fabien,
>>   Without seeing a log, I can only speculate that the connection is
>> timing out.
>>
>>  Try adjusting the GET_PARAMETER_NAMES_DEPTH_THRESHOLD and
>> SESSION_TIMEOUT values. The wiki
>> <https://github.com/zaidka/genieacs/wiki/GenieACS-General-Config> has
>> information on more information on the values to try. Remember to restart
>> the cwmp worker after adjusting the values.
>>
>>  In my environment, I had to use
>>    "GET_PARAMETER_NAMES_DEPTH_THRESHOLD" : 2,
>>   "SESSION_TIMEOUT" : 90,
>>
>>  -dan
>>
>> On Fri, May 29, 2015 at 12:04 AM, Fabien Bazille <fab.baz22 at gmail.com>
>> wrote:
>>
>>>     Hi,
>>>
>>>  I'm trying to add some Cisco routers in my network pro supervision and
>>> provision.
>>>  After i start the cwmp on the cisco, the device is correctly added to
>>> GenieACS, but for the task: RefreshObject i get a resources exceeded fault
>>> code (9004).
>>>  And when i look to a capture the frame causing that problem is the
>>> GetParameterValues from the ACS.
>>>
>>>  My training concern the setup of GenieACS, that's why i open so much
>>> issues and I'm sorry for that.
>>>
>>>  Thank you for your time.
>>>
>>>  Best regards,
>>>
>>>  Fabien B
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.genieacs.com
>>> http://lists.genieacs.com/mailman/listinfo/users
>>>
>>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.genieacs.com
>> http://lists.genieacs.com/mailman/listinfo/users
>>
>>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20150602/4b014a09/attachment-0001.html>