Cisco's CPE resources exceeded

Fabien Bazille fab.baz22 at gmail.com
Tue Jun 2 05:44:14 EDT 2015 

I think that log will be more useful, sorry for the double post:
*Jun  2 09:21:32.907:  CWMP PROFILE ERROR :
cwmp_wan_conn_device_instance_get ->
 No instance ( inst_count: 0 )for parameter name:
InternetGatewayDevice.WANDevic
e.1.WANConnectionDevice.
*Jun  2 09:21:32.911:  CWMP PROFILE ERROR :
cwmp_wan_conn_device_instance_get ->
 No instance ( inst_count: 0 )for parameter name:
InternetGatewayDevice.WANDevic
e.1.WANDSLConnectionManagement.ConnectionService.
*Jun  2 09:21:32.911: CWMP: cwmp_run -> Close pending ...
*Jun  2 09:21:32.911: CWMP: cwmp_https_send_message -> HTTP request type is
cwmp
:GetParameterNamesResponse, mime_type is text/xml
SOAPACTION:
< < < < < < < <
GetParameterNamesResponse
< < < < < < < <

*Jun  2 09:21:32.979: CWMP: cwmp_session_response_data -> HTTP ACS Response
code
 200
*Jun  2 09:21:32.979: CWMP: cwmp_session_response_data -> HTTP ACS Response
stri
ng OK
*Jun  2 09:21:32.979: CWMP: cwmp_soap_interpret -> Interpreting input SOAP
Envel
ope...
*Jun  2 09:21:32.983: CWMP: cwmp_ID -> ID 556d703db9c5036923c9db9a parsed
succes
sfully
*Jun  2 09:21:32.983:  CWMP ERROR: cwmp_ParameterNames -> array count
ParameterN
ames is 32
> > > > > > > >
GetParameterValues
> > > > > > > >
*Jun  2 09:21:32.983: CWMP: rpc_process -> RPC request queued.

*Jun  2 09:21:32.983: CWMP: cwmp_frame_get_parameter_values_response ->
Sending
fault 9004
*Jun  2 09:21:32.983: CWMP: cwmp_run -> Close pending ...

It send the error code 9004 (Bad parameter name)

2015-06-02 9:30 GMT+02:00 Fabien Bazille <fab.baz22 at gmail.com>:

> Here is the log and the cpe's configuration:
>
> Config:
> cwmp agent
>  enable download
>  enable
>  management server url http://192.168.2.175:7547/
>
> Log:
> *Jun  2 07:26:33.252: CWMP: cwmp_process -> CWMP Engine shutdown
> *Jun  2 07:26:34.428: CWMP: cwmp_process -> CWMP Engine started
> *Jun  2 07:26:34.428: CWMP PROFILE: cwmp_generate_connection_request_URL
> -> Conn
> ectionRequestURL =
> http://192.168.172.219/00000C/CISCO887%2dK9V01/FCZ154390G7/cw
> mp
>
> *Jun  2 07:26:34.472: CWMP PROFILE:
> persist_store_cwmp_baseline_inventory_data -
> > Successfully wrote 2936 bytes into file
> *Jun  2 07:26:34.624: CWMP: cwmp_create_session -> Contacting URL
> http://192.168
> .2.175:7547/
> *Jun  2 07:26:34.624: CWMP: cwmp_create_session -> Driving username
> *Jun  2 07:26:34.624: CWMP: cwmp_create_session -> Driving password
> *Jun  2 07:26:34.624: CWMP: cwmp_process_request_queue -> Queueing request
> with
> type 2
> *Jun  2 07:26:34.624: CWMP: cwmp_https_send_message -> HTTP request type
> is cwmp
> :Inform, mime_type is text/xml
> SOAPACTION: "cwmp:Inform"
> < < < < < < < <
> Inform
> < < < < < < < <
>
> *Jun  2 07:26:34.628: In cwmp_fwding_process, kill_cwmp_fwding 0
> *Jun  2 07:26:34.628: cwmp_initialize_fwding -> CWMP_UP
> *Jun  2 07:26:34.628: 1         TRUE    0.0.0.0         0.0.0.0
> 192.168.
> 172.253 254
> *Jun  2 07:26:34.664: CWMP: cwmp_session_response_data -> HTTP ACS
> Response code
>  200
> *Jun  2 07:26:34.664: CWMP: cwmp_session_response_data -> HTTP ACS
> Response stri
> ng OK
> *Jun  2 07:26:34.664: CWMP: cwmp_soap_interpret -> Interpreting input SOAP
> Envel
> ope...
> *Jun  2 07:26:34.664: CWMP: cwmp_ID -> ID 54 parsed successfully
> *Jun  2 07:26:34.664: CWMP: cwmp_MaxEnvelopes -> MaxEnvelopes 1 parsed
> successfu
> lly
> > > > > > > > >
> InformResponse
> > > > > > > > >
> *Jun  2 07:26:34.664: CWMP: cwmp_run -> Close pending ...
> *Jun  2 07:26:34.664: CWMP: cwmp_https_send_message -> HTTP message is
> Empty Req
> uest/Response
> < < < < < < < <
> EMPTY REQUEST
> < < < < < < < <
>
> *Jun  2 07:26:34.668: CWMP: cwmp_session_response_data -> HTTP ACS
> Response code
>  204
> *Jun  2 07:26:34.672: CWMP: cwmp_session_response_data -> HTTP ACS
> Response stri
> ng
> > > > > > > > >
> EMPTY RESPONSE
> > > > > > > > >e
> *Jun  2 07:26:34.672: CWMP: cwmp_https_close_connection -> Session and
> Connectio
> n to 192.168.2.175 closed successfull
>
> Maybe i have to adjust some parameters in config.json ?
>
> 2015-06-01 15:35 GMT+02:00 Dan Morphis <dan at milkcarton.com>:
>
>> What does the syslog on the cpe contain? That will likely contain info on
>> why the cpe is faulting. Did you change the parameters and restart the cwmp
>> process?
>>
>> -dan
>>
>> On May 31, 2015, at 11:53 PM, Fabien Bazille <fab.baz22 at gmail.com> wrote:
>>
>> Thank you Manny,
>>
>> Dan, here is the log:
>> 00000C-CISCO887%252dK9V01-FCZ154390G7: Inform (1 BOOT); retry
>> count 0
>>
>> 00000C-CISCO887%252dK9V01-FCZ154390G7: Started task
>> refreshObject(556c0ec04de397db3655201c)
>>
>> 00000C-CISCO887%252dK9V01-FCZ154390G7: Fault response for task
>> 556c0ec04de397db3655201c. Retrying after 300 seconds.
>>
>> And the Fault tells me resource exceeded.
>>
>>
>>
>> 2015-05-29 18:25 GMT+02:00 Manny Veloso <manny.veloso at smartrg.com>:
>>
>>>  That error is probably the Cisco CWMP client barfing. Some CWMP
>>> clients run out of memory when dumping their whole tr-98/181 tree,
>>> especially the older ones.
>>>
>>>  The good thing is it tells you it’s dead, instead of just, well,
>>> dying. The below parameters should help.
>>>  --
>>> Manny Veloso
>>>  Sr. Solutions Engineer
>>> Smartrg.com
>>>
>>>   From: Dan Morphis <dan at milkcarton.com>
>>> Reply-To: Community support for GenieACS users <users at lists.genieacs.com
>>> >
>>> Date: Friday, May 29, 2015 at 8:55 AM
>>> To: Community support for GenieACS users <users at lists.genieacs.com>
>>> Subject: Re: Cisco's CPE resources exceeded
>>>
>>>   Fabien,
>>>   Without seeing a log, I can only speculate that the connection is
>>> timing out.
>>>
>>>  Try adjusting the GET_PARAMETER_NAMES_DEPTH_THRESHOLD and
>>> SESSION_TIMEOUT values. The wiki
>>> <https://github.com/zaidka/genieacs/wiki/GenieACS-General-Config> has
>>> information on more information on the values to try. Remember to
>>> restart the cwmp worker after adjusting the values.
>>>
>>>  In my environment, I had to use
>>>    "GET_PARAMETER_NAMES_DEPTH_THRESHOLD" : 2,
>>>   "SESSION_TIMEOUT" : 90,
>>>
>>>  -dan
>>>
>>> On Fri, May 29, 2015 at 12:04 AM, Fabien Bazille <fab.baz22 at gmail.com>
>>> wrote:
>>>
>>>>     Hi,
>>>>
>>>>  I'm trying to add some Cisco routers in my network pro supervision and
>>>> provision.
>>>>  After i start the cwmp on the cisco, the device is correctly added to
>>>> GenieACS, but for the task: RefreshObject i get a resources exceeded fault
>>>> code (9004).
>>>>  And when i look to a capture the frame causing that problem is the
>>>> GetParameterValues from the ACS.
>>>>
>>>>  My training concern the setup of GenieACS, that's why i open so much
>>>> issues and I'm sorry for that.
>>>>
>>>>  Thank you for your time.
>>>>
>>>>  Best regards,
>>>>
>>>>  Fabien B
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.genieacs.com
>>>> http://lists.genieacs.com/mailman/listinfo/users
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.genieacs.com
>>> http://lists.genieacs.com/mailman/listinfo/users
>>>
>>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.genieacs.com
>> http://lists.genieacs.com/mailman/listinfo/users
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.genieacs.com
>> http://lists.genieacs.com/mailman/listinfo/users
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20150602/936dcdd1/attachment.html>

More information about the Users mailing list