How to graph selected parameters.

[Sergio Fernández]

Hello Aleksey,

I have been thinking about the same thing. There are some options. In an
old software using another ACS I've seen they used RDDTool, but that's very
old and unreliable, just like Cacti.
I was thinking about some alternatives like Grafana, using a 5-minute
Preset in GenieACS that stores the values, using extension scripts, for
example. So then you can format the data being saved.
But anyway, if the number of CPEs is high, GenieACS can become very slow...
It's a difficult topic if you are seeking a quick, robust system for an
ACS. Some years ago I think this same question was answered on the mailing
list, and the best solution would be to modify the CPE's firmware in order
to send stats within the Informs... But that is hardly achievable most of
the times :)

Best regards.

Sergio Fernández Rubio - https://www.linkedin.com/in/sergiofdz/
(+34) 687 016 994
CEO @ ACSdesk
https://acsdesk.com

2017-09-12 21:01 GMT+02:00 Aleksey Qwerty <russian.qwerty at gmail.com>:

> Hello everyone!
>
> I've been trying to find a solution to graph radio parameters (TXPower,
> SINR, RSRP, etc) that we're getting from radio equipment via TR-069
> periodic reports.
>
> Is there any way to store and graph historical data for selected
> parameters in GenieACS?
>
> Alternative solution is to feed some external graphing system (Cacti,
> Zenoss, Observium, etc) with TR-069 data that ACS is getting.
>
> Please advise.
>
> --
> BR,
> Aleksey Qwerty
>
> _______________________________________________
> Users mailing list
> Users at lists.genieacs.com
> http://lists.genieacs.com/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20171005/f6b57ef1/attachment.html>