Http/Https cwmp listen

[Johan Söderström]

Dear Dan,

Thank you for your answer.
The devices are Comtrend and there is only one interface.
I can’t just switch the device on the https, I need to do a firmware upgrade to activate the ssl certificate on the device.

What I found strange is that I see the cwmp service responding to my device in http but the server does not want to discover the new device coming.
This is why I wish to have both service active at the same time.

Regards,

Johan Söderström
Senior System Engineer

--------------------------------------------------------
Broadband Networks AG, In der Luberzen 19, 8902 Urdorf, Switzerland
Broadband Networks SA, Rue du Liseron 7, 1006 Lausanne, Switzerland

Phone +41 79 379 57 11
johan.soderstrom at broadbandnetworks.ch<mailto:johan.soderstrom at broadbandnetworks.ch>
www.broadbandnetworks.ch<http://www.broadbandnetworks.ch/>

Jetzt anmelden<http://broadbandnetworks.ch/de/jetzt-anmelden-neue-bbn-tagesworkshops-im-maerz-2018/>: Neue BBN-Tagesworkshops im März 2018!
Inscrivez-vous maintenant<http://broadbandnetworks.ch/fr/inscrivez-vous-maintenant-nouvelles-journees-de-seminaires-bbn-en-mars-2018/>: nouvelles journées de séminaire BBN en mars 2018!

From: Users [mailto:users-bounces at lists.genieacs.com] On Behalf Of Dan Morphis
Sent: Tuesday, 6 February 2018 18:17
To: Community support for GenieACS users <users at lists.genieacs.com>
Subject: Re: Http/Https cwmp listen

You could create a second instance of the cwmp thats sole purpose is to switch the CPE to the https URL.

What CPEs are you running? Do your CPEs have two interfaces? One for management, one for the customer? This is how we have ours configured. The mgmt network is IPoE, and we use DHCP to assign the ACS URL.

On Tue, Feb 6, 2018 at 1:20 AM, Johan Söderström <johan.soderstrom at broadbandnetworks.ch<mailto:johan.soderstrom at broadbandnetworks.ch>> wrote:
Hello all,

I have successfully changed the GenieACS to listen in Https mode for the cwmp service.
I have a device in the system with ssl everything is fine.

My problem now is that all my device first connect to the ACS in http mode and after first connexion I change the firmware and it will turn to SSL.
But apparently the GenieACS server does not work in normal http mode now.

Is it possible to have both http and https working at the same time?

Regards,

Johan Söderström
Senior System Engineer

--------------------------------------------------------
Broadband Networks AG, In der Luberzen 19, 8902 Urdorf, Switzerland
Broadband Networks SA, Rue du Liseron 7, 1006 Lausanne, Switzerland

Phone +41 79 379 57 11<tel:+41%2079%20379%2057%2011>
johan.soderstrom at broadbandnetworks.ch<mailto:johan.soderstrom at broadbandnetworks.ch>
www.broadbandnetworks.ch<http://www.broadbandnetworks.ch/>

Jetzt anmelden<http://broadbandnetworks.ch/de/jetzt-anmelden-neue-bbn-tagesworkshops-im-maerz-2018/>: Neue BBN-Tagesworkshops im März 2018!
Inscrivez-vous maintenant<http://broadbandnetworks.ch/fr/inscrivez-vous-maintenant-nouvelles-journees-de-seminaires-bbn-en-mars-2018/>: nouvelles journées de séminaire BBN en mars 2018!


_______________________________________________
Users mailing list
Users at lists.genieacs.com<mailto:Users at lists.genieacs.com>
http://lists.genieacs.com/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genieacs.com/pipermail/users/attachments/20180206/b5442388/attachment-0001.html>